Rack in pinion from (Old Post)

[Kendog 170]

I went ahead and bought the Dakota manifolds because the price was right at the time but they wont go in unless power steering comes out.
Current plan is 73 K-member with dakota p/s rack and pinion through it, the Dakota manilfolds fit and theout and around type front sway bar from a 67 will too. Topped with a fresh 273 commando engine and one flowmaster noise maker.

This was from an old 2008 post. @RedFish Any pics on your steering? Has anyone else done something similar? Just curious.

 

[Kendog 170]

This was from an old 2008 post. @RedFish Any pics on your steering? Has anyone else done something similar? Just curious.

No bites? Back in the 80's there was some guy putting racks in Darts but I could not locate him. He was supposedly from Medford Ma.

 

[RedFish]

This was from an old 2008 post. @RedFish Any pics on your steering? Has anyone else done something similar? Just curious.

I sold that project car along with all the parts I had accumulated.

 

[440outlawdart]

i want to put a rack and pinion in my k frame.been collecting pics heres a few.everyone wants to buy tubular k frames.but i want to be old school

 

[440outlawdart]

few more.it can be done if planned right

 

[Kendog 170]

Thanks for the pics. It would be nice if someone comes up with a step by step of which rack used and how it was accomplished.If you attempt this please document it .
Thanks

 

[440outlawdart]

kendog.i will do this someday

 

[B.R.E.Demon]

I plan to do this conversion similar to the old pro stock way with the conversion to a hemi in my pro stock clone

 

[67Dart273]

I plan to do this conversion similar to the old pro stock way with the conversion to a hemi in my pro stock clone

What way is that?