[FOR SALE] RB pushrods

[roadrunninMark]

I have a set of pushrods in my spare parts pile, came from my 440. They are 9 1/4" with a tape measure. All roll fine on a smooth surface. $50 for the set plus shipping from Fayetteville GA.

 

[David Musselwhite]

Where the pushrods used with hydraulic lifters? How about the cylinder heads and block where they milled any?

 

[roadrunninMark]

Hi David, pushrods were used with a hydraulic roller cam. I do not know if the heads or blocked were ever milled as the person I bought the car from did not build the engine, and this was a long time ago.