Rear Disc brake conv with standard Bearings

[joes68340s]

I'm looking for a good rear Disc brake conversion that dosent use green bearings. Is there a kit out there that uses the factory adjustable bearings.

 

[dodgedifferent2]

http://www.forabodiesonly.com/mopar/showthread.php?t=338145&highlight=rear+disk


I make one affordable setup.

 

[roccodart440]

On my last build I used these http://www.tsmmfg.com/Rear Disc/2160.html

Double check but I don't think they required green bearings.

 

[65 Dartman]

http://www.forabodiesonly.com/mopar/showthread.php?t=338145&highlight=rear+disk


I make one affordable setup.

I used his kit which uses the standard tapered bearings. It was easy to install. I elected to open the center register of the recommended rotors rather than turn the axle center register. Major plus: my brand new 14 in Magnum 500's fit (I have not checked stock 14 in steel wheels nor stock 14 in Rallyes). 15 in wheels will clear no problem.

 

[lilcuda]

Joe, I have Dr Diff's kit on the Valiant. If you want to check out what it looks like before you buy, let me know. We'll figure out a place to meet.

Lee

 

[joes68340s]

Thanks Lee, I will let you know.

 

[abodyjoe]

think dr diff offers a kit

 

[72bluNblu]

Dr. Diff has a couple of kits that allows the use of the stock tapered bearings.

10.7 rear disks http://www.doctordiff.com/rear-disc-brake-kit-10.7-rotor.html

11.7" rear disks http://www.doctordiff.com/rear-disc-brake-kit-11.7-rotor.html

And Cass (Dr. Diff) is awesome to deal with. I have his 13" cobra style front disk kit on my Duster. Great stuff. :thumbup: