Roller cam repair

[Sterling]

I purchased a R1 block, 59° lifter bores with W9 cylinder heads. I got it disassembled in pieces, a roller lifter stopped rolling and scarred one lobe on the cam. I have a get a new set of pistons, and have the cam repaired or replaced. I have no information on the cam. I am looking for suggestions on having the cam repaired, and the specs on the cam

 

[Rocket]

Call Oregon Cams or another cam regrinder and see if it can be repaired.

 

[HuntedDuckV351]

I lost a lifter and sent it back to Bullet and have had no problems with having it welded up and reground on the bad lobe. Been 10 years ago now.