I picked these up as part of a deal and don't need them.
I have 6 forged pistons that have Ross XL400 marked on them. Pins and spiral locks are included along with the set of rings that came on them.
Here is what ROSS sent me for info on them.
Jack,
Here is some info on the pistons for you. It’s a flat top that uses 1/16 1/16 3/16 ring package.
Bore: 4.070
Stroke: 4.00
Rod: 6.123
CH: 1.459
Pin: .984
Need any more info just let me know.
Dominic Carollo
Sales & Technical Support
ROSS RACING PISTONS
I would not hesitate to use these pistons in an engine build. All you would need is 2 more pistons from Ross which can be obtained from the order number that is engraved on the bottom of the piston.
I am not trying to get rich off of these so $100 plus shipping is the price.
Parts located in Baxters Corner, New Brunswick, Canada but will be shipped from Calais, Maine
PM me here.
Jack
I have 6 forged pistons that have Ross XL400 marked on them. Pins and spiral locks are included along with the set of rings that came on them.
Here is what ROSS sent me for info on them.
Jack,
Here is some info on the pistons for you. It’s a flat top that uses 1/16 1/16 3/16 ring package.
Bore: 4.070
Stroke: 4.00
Rod: 6.123
CH: 1.459
Pin: .984
Need any more info just let me know.
Dominic Carollo
Sales & Technical Support
ROSS RACING PISTONS
I would not hesitate to use these pistons in an engine build. All you would need is 2 more pistons from Ross which can be obtained from the order number that is engraved on the bottom of the piston.
I am not trying to get rich off of these so $100 plus shipping is the price.
Parts located in Baxters Corner, New Brunswick, Canada but will be shipped from Calais, Maine
PM me here.
Jack
