Well everyone's put in their hard work and effort into their small blocks, so time to gloat and show them off! Any and all! Here's my 360 and 318 to contribute
Last edited:
Small Block Showroom!
- Thread starter gagembassett
- Start date
-
Mine is still in boxes.... lol
Photos of our engines? OK, the latest throw together, a Hyd cam in a 5.9. A refresh to pound on for now. Cut the crank, new bearings of course, new oil pump, might as well right? An old Crane cam, 236 -.497 - 108, chink rpm, edelbrock 750, summit 1-5/8 headers into a summit X pipe @ 2-1/2. TCI 727/3600 stall.
All for a ‘74 Duster. EZ bracket car.
All for a ‘74 Duster. EZ bracket car.
Working on it.....................1971 340 with reduced compression for a mild cam and pump gas. Should be about 9.3:1. Had to go with the thicker head gaskets.......The 1008's were a bit tight.
340 in my Duster
360 Mag I put in my old Power Wagon.
318 its orphaned at the moment, sold the cuda I was going to put it in.
360 Mag I put in my old Power Wagon.
318 its orphaned at the moment, sold the cuda I was going to put it in.
It's old and dirty, but it runs and is all there.
Was a daily driver for 25 years and 300,000 miles, then only lightly used, 30 years later only another 23,000 miles.
Was a daily driver for 25 years and 300,000 miles, then only lightly used, 30 years later only another 23,000 miles.
92 , 360 Magnum in a 70 Dart
The current 360 in my 73’ Dart
Ironracer
Gearhead
Using Gals phone, mines off-line. Or I'd post some pics. Go Figure. Ain't sure if I should laugh or cry
harrisonm
Well-Known Member
Here is a picture of my 69 Barracuda 340 engine bay with the valve covers and air cleaner lid that I did a 4 color powder coat job on by myself. I don't know why that stupid towel is in the picture.
Last edited:
Handsome Jewlery Everyone! Thank You All!
Oh, and a Stock 273. Thanks!
Oh, and a Stock 273. Thanks!
Stock 360
☆☆☆☆☆
☆☆☆☆☆
Jeff Seighman
aka jeffnmo
My 340 in my 1970 340 Dart.
ragtopfury
Well-Known Member
The 360 I threw together from spare parts for the Shelby Dakota
64mopar
Well-Known Member
Mine
64mopar
Well-Known Member
My brother's,at this moment.
ragtopfury
Well-Known Member
Ya didn't say it had to be pretty... Brought this 126k mile gem home a couple of weeks ago for my son's 73 Dart Sport.
build.
build.
Kendog 170
Let the boy go !
68 Hard top 1st 2 pics then 68 Ragtop
abodyjoe
Well-Known Member
,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Last edited:
Josh owen
Bang em till it breaks
First up. Aluminum headed 318 going in a 84 d150
Next is a 69' 340 for my duster
Next is a 68' 340 in my coronet
Next are some 318 derby motors and finally the 422ci for an unknown car at this point
Next is a 69' 340 for my duster
Next is a 68' 340 in my coronet
Next are some 318 derby motors and finally the 422ci for an unknown car at this point
Even in the kitchen. I like it! LOL
-
