Spindle I D needed

-

RAT ROD AL

MOPAR ARCHAEOLOGIST - one parts hoard at a time!
FABO Gold Member
Joined
Jan 18, 2013
Messages
7,752
Reaction score
10,200
Location
Robbinsville, North Carolina
These spindles came in the bunch of parts I picked awhile back.Can anyone ID them.
The big bolts are to wide for an A body lower ball joint , and the hole is to big for a small upper ball joint.
Some sort of aftermarket stuff but WHAT ? They look pretty heavy duty.
There is no markings on them from manufacturer. Any thoughts? Thanks AL

15583779303232161174015460109776.jpg
 
Those are Fatman drop spindles. The '73 and up UCA and joints should work.

They're actually designed for F-Body (Volare/Aspen or all B, F, J, M-Body vehicles) cars but will work on A-Body's. All stock brake and steering components will bolt right on. The difference between the two is, the F-Body knuckle is about 3/8" taller. There's been a lot of debate over using the taller knuckle but the concerns are largely unfounded. In fact, the geometry is slightly improved under certain conditions according to this article.
 
Last edited:
-
Back
Top