SPINDLE RING LIGHT FOR BRIDGEPORT CLONE LAGUN FTV-3 MILLING MACHINE

PROSTOCKTOM

FABO Gold Member
FABO Gold Member
Joined
Oct 8, 2013
Messages
514
Reaction score
457
Location
West Central Indiana
My friend Matt is a really crafty guy and he made this cool ring light for his vertical milling machine. I am going to have him make me one for my mill too.

Anyway today he decided to make a YouTube video of it. I was really impressed with the whole deal. Maybe you guys will like it as well.



Tom
 
Last edited:

6PakBee

FABO Gold Member
FABO Gold Member
Joined
Feb 8, 2020
Messages
727
Reaction score
705
Location
North Dakota
I have a Grizzly knee mill and this would be the cat's butt for that. Two questions, what is the ID of the bracket? Would he be willing to make more and what would be the cost? Thanks.
 

PROSTOCKTOM

FABO Gold Member
FABO Gold Member
Joined
Oct 8, 2013
Messages
514
Reaction score
457
Location
West Central Indiana
This one in the video is 87mm i.d. He would be willing to make and sell you the complete setup with the power supply shipped for $90. Also he printed it in orange for the video so you could see the contrast. A production part would be in black unless you wanted it in another color that he has in stock. Should you decide you want one I can provide hs contact information in a PM.

Tom
 

6PakBee

FABO Gold Member
FABO Gold Member
Joined
Feb 8, 2020
Messages
727
Reaction score
705
Location
North Dakota
This one in the video is 87mm i.d. He would be willing to make and sell you the complete setup with the power supply shipped for $90. Also he printed it in orange for the video so you could see the contrast. A production part would be in black unless you wanted it in another color that he has in stock. Should you decide you want one I can provide hs contact information in a PM.

Tom
Let me measure my diameter and we'll go from there. Thanks for the reply!
 

6PakBee

FABO Gold Member
FABO Gold Member
Joined
Feb 8, 2020
Messages
727
Reaction score
705
Location
North Dakota
Well, I looked at my Grizzly and this setup won't work. My housing has a tapered snout just above the quill and where the taper ends there is just too much other hardware that interferes.
 
Top