Stainless braided brake line - rear end housing T/splitter?

[Locomotion]

So far I've found that Inline Tube has kits for different Mopar rear end housings. I was looking for only the pre-made T/splitter that accepts OEM solid lines. (The assembly is held by the screw-in vent tube.) Are there any other companies that have them?

That's the only OEM rubber line I have in the brake system and trying to get away from that.

 

[mopardude318]

so you need more than this?

Home :: Brakes :: Rear :: Rear Flex Hose to Hard Line Brass Tee

 

[Dubob]

This what you’re looking for?

Home :: Brakes :: Rear :: Rear Flex Hose to Hard Line Brass Tee

There are 2 different styles shown.

 

[jazak5]

So far I've found that Inline Tube has kits for different Mopar rear end housings. I was looking for only the pre-made T/splitter that accepts OEM solid lines. (The assembly is held by the screw-in vent tube.) Are there any other companies that have them?

That's the only OEM rubber line I have in the brake system and trying to get away from that.

Got mineed front Russell there is a chat on it here

 

[Locomotion]

This what you’re looking for?

Home :: Brakes :: Rear :: Rear Flex Hose to Hard Line Brass Tee

There are 2 different styles shown.

If I don't find a reasonably priced assembly with the braided hose installed already, that's what I'd have to use. I'll look into the Russell brand jazak5 mentioned too.

Thanks