Steering column white plastic pieces

[4spdragtop]

Ok I was over at dads yesterday and noticed that I think he is missing the white plastic pieces that slide into the brace under the steering column. Im not sure if there are 2 or 3 of these. Its for a 67 cuda, pwr steering and console, auto tranny...not that should make a difference(I think)

Thanks
Steve/George

 

[krazykuda]

There was a thread on those about a year ago. I don't know what section it was in.


This guy is selling some:

http://www.forabodiesonly.com/mopar/showthread.php?t=182847


Or here is a thread with a supplier listed:

http://www.forabodiesonly.com/mopar/showthread.php?t=127552


Good Luck Steve
Karl

 

[bernieca]

You can get them at National Moparts in Beaverton, Ontario. Call and ask for Nigel. You will need 3. Good luck.

 

[barracudakid]

i have those good used.
67 may have been metal.
pm me

 

[RedFish]

i have those good used.
67 may have been metal.
pm me

That is correct. The plastic ones fit the same places if metal ones can't be found.

BEWARE, Be very careful that you dont cross thread or feck up the caged nut where the 1 bolt goes at lower right of the column support.
There is a nightmare hidden there.