1. dennday67

    dennday67 Well-Known Member

    Messages:
    731
    Likes Received:
    9
    Joined:
    Feb 6, 2010
    Location:
    Yakima, WA
    Local Time:
    7:23 PM
    I received my 408 last night but looks like it came with a stock center sump pan instead of the kevko pan I was told it comes with?
     
  2. dennday67

    dennday67 Well-Known Member

    Messages:
    731
    Likes Received:
    9
    Joined:
    Feb 6, 2010
    Location:
    Yakima, WA
    Local Time:
    7:23 PM
    nc_oc=AQk-vuHw0u7A4RmMmymQksp6sYfMPzVRyJMhkAH-dQRfi1ungt3-BVk4Jhq0KiR9-_c&_nc_ht=scontent-sea1-1.jpg
     
  3. rumblefish360

    rumblefish360 So close, yet so far away FABO Gold Member

    Messages:
    39,027
    Likes Received:
    10602
    Joined:
    Jun 21, 2005
    Location:
    New York, on a Island
    Local Time:
    8:23 PM
    It is possible that you have a Kevco stock replacement pan. Go to there site and check it out how they also have trick stock pans.

    But ask Blue Print about what you received.
     
  4. dennday67

    dennday67 Well-Known Member

    Messages:
    731
    Likes Received:
    9
    Joined:
    Feb 6, 2010
    Location:
    Yakima, WA
    Local Time:
    7:23 PM
    When I asked while the motor was being built the part number they gave me was for the 1 at extra capacity with baffles. Im not arguing or anything cause ground clearances will be an issue with my setup. I was just wanting a clarification as to what I received.
     
    • Like Like x 1
    • dennday67

      dennday67 Well-Known Member

      Messages:
      731
      Likes Received:
      9
      Joined:
      Feb 6, 2010
      Location:
      Yakima, WA
      Local Time:
      7:23 PM
      The gentleman said it comes as shown in the picture with the kevko M302.
       
    • rumblefish360

      rumblefish360 So close, yet so far away FABO Gold Member

      Messages:
      39,027
      Likes Received:
      10602
      Joined:
      Jun 21, 2005
      Location:
      New York, on a Island
      Local Time:
      8:23 PM
    • dennday67

      dennday67 Well-Known Member

      Messages:
      731
      Likes Received:
      9
      Joined:
      Feb 6, 2010
      Location:
      Yakima, WA
      Local Time:
      7:23 PM
      As you can see that is clearly not the pan that is on my 408
       
    • dennday67

      dennday67 Well-Known Member

      Messages:
      731
      Likes Received:
      9
      Joined:
      Feb 6, 2010
      Location:
      Yakima, WA
      Local Time:
      7:23 PM
      And the motor was tagged with 6 qt oil capacity...
       
    • Dartsun

      Dartsun Member

      Messages:
      1,469
      Likes Received:
      1041
      Joined:
      Feb 12, 2012
      Location:
      Springfield Oregon
      Local Time:
      5:23 PM
      My blueprint 408 came with a Kevco but it’s nearly 10 yrs old.
       
    • Dusterdenovo

      Dusterdenovo Contentedly Old School

      Messages:
      1,014
      Likes Received:
      1911
      Joined:
      Dec 10, 2011
      Location:
      British Columbia
      Local Time:
      5:23 PM
      2 years ago, my Blueprint 408 arrived with the same pan you got. I thought it might be the result of them painting my block orange, and the special handling involved. Nevertheless, just 1 call to @Johnny Mac and they shipped me the Kevco pan with gasket and pickup no charge no problem. I switched pans and sold that new stock style pan for my trouble. FWIW that Kevco pan fits perfect in my 73 Duster, stock front end, TTI headers etc.

      Just talk to Johnny.

      And Congrats on your new 408. I've got 6000km on mine so far and it runs awesome and hauls ass.

      20171020_205906_HDR.jpg
       
      • Like Like x 1
      • Johnny Mac

        Johnny Mac www.blueprintengines.com FABO Vendor

        Messages:
        3,686
        Likes Received:
        2784
        Joined:
        Jul 10, 2010
        Location:
        OHIO
        Local Time:
        8:23 PM
        Hey @dennday67, I'm happy to help, can you shoot me your serial # in a PM? can you remind me if you ordered it direct from me, or direct from BP, or through a reseller?
        When we knock out 50 engines a day, We do sometimes have to change items when shortages happen, or production goes low. In this case, the stamped pan performed the same as the aftermarket pans we tested, so its an allowable sub on our end for a deep sump pan. BUTTTTT that doesn't excuse the incorrect oil tag, or the incorrect information being given. I'm pretty careful not to name drop brands, unless its the ONLY one we use for that item, but if it was me, i apologize. and if not, then i'll work with whoever it was and inform them of the above. regardless, shoot me a PM, and i'll gladly see what pan/capacity it should be. and work with you to make you happy.
         
        • Like Like x 2
        • dennday67

          dennday67 Well-Known Member

          Messages:
          731
          Likes Received:
          9
          Joined:
          Feb 6, 2010
          Location:
          Yakima, WA
          Local Time:
          7:23 PM
          Sorry I've been extremely busy and haven't been online in a very long time. I did order my motor direct from BPE. I compared it to one of my other stock pans and it is identical so it's a stock 5qt capacity pan. I can private message you the serial number if you wish but I would like to discuss a couple things in a pm if that's okay?
           
        • Johnny Mac

          Johnny Mac www.blueprintengines.com FABO Vendor

          Messages:
          3,686
          Likes Received:
          2784
          Joined:
          Jul 10, 2010
          Location:
          OHIO
          Local Time:
          8:23 PM
          Of course. PM me anytime
           
        1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
          By continuing to use this site, you are consenting to our use of cookies.