Morning .
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
I was going to buy a thickness gauge and saw it said steel only then there are aluminum only. Screw it I have a 1" mic!
Unconventional
Well-Known Member
It's Scout Saturday!
Good morning
Good morning
Here ya go hoppy I did a Friday night pizza guy copy and paste for you
Here's why different metals at the same gauge can have different thicknesses:
- Origin of the Gauge System: The gauge system originated from the number of times a piece of metal was passed through a rolling mill to reduce its thickness. Different metals have different properties (like density and malleability) and therefore respond differently to the rolling process.
- Material Properties: Each type of metal has its own unique properties, such as density and strength. For example, stainless steel is denser and stronger than aluminum, so a sheet of stainless steel of the same gauge number will be thicker than a sheet of aluminum.
- Historical Development of Standards: Different gauge standards were developed over time for various metals, further contributing to the discrepancies in thickness at the same gauge number.
Example
- 10-gauge stainless steel is 0.141" thick.
- 10-gauge aluminum is 0.102" thick.
- When working with different types of metal, it's crucial to refer to the specific gauge chart for each metal or, even better, use decimal thickness measurements to avoid confusion and ensure accuracy.
- Always confirm physical measurements with a caliper or gauge wheel.
I am pretty happy with that stamper. Think I found a guy that will make me a embossing stamp from a sample. That will go in a die in the press. Now Tags to get made.
Looks like a nice one Ray.
Will do the letters properly. Had to buy 5 different dies!
Good morning all and welcome to the weekend
Unconventional
Well-Known Member
Little metallic tags that say GO F%^& YOURSELF
There could be a retail market for such EBay here you come!
I can do that for sure. They should look right not like this that is engraved and also $80
Check,
Check
And check.
I also downloaded my entire file, all 3800 pages worth and my medical files, all 5300 pages worth to a CD. Supply records and all too.
Thanks but I didn’t do much of anything really. At least nothing that made any impact anywhere
Getting a die to emboss from the back will be a challenge.
Agree
This was sold for $1800 NOS Lipstick on a pig, it was seriously not right.
Everything you do has an impact.
Yes it does!
OK I'm out for now.
Have fun.
Have fun.
Unconventional
Well-Known Member
2 car shows in town today, another tomorrow. The Sunday show will be dominated by the air and hydraulic ride height adjusted vehicles 
Impalers with skinny wheels and cambered out Asian imports just a'int my thing so I'll avoid that one like the plague
Impalers with skinny wheels and cambered out Asian imports just a'int my thing so I'll avoid that one like the plague 
Morning fellers and fellet, have a cars and coffee thing going on in Mancos to the east to check out.
Good morning everyone. Last supposed to have severe storms and flooding. Looks to me to be all going north of me. Maybe get some work done afterall
Haha yeah, to my knees
Morning y'all
Yard work today.
Yard work today.
It's turning the corner supposedly. Might miss everywhere except Bermuda and the Canadian maritime
Believe this is pretty much a standard late season track.
Surf will be interesting on the Outer Banks
Believe this is pretty much a standard late season track.
Surf will be interesting on the Outer Banks
We had our car cruise through town yesterday .
-
Similar threads
