strut rod bushing

Discussion in 'Suspension, Steering and Chassis' started by mopardemon340, Jun 7, 2018.

  1. mopardemon340

    mopardemon340 Well-Known Member

    Messages:
    500
    Likes Received:
    30
    Joined:
    Aug 10, 2015
    Location:
    WI
    Local Time:
    8:11 PM
    i have a 72 demon and im replacing all my bushings but have no idea how to get the strut rod out and what torque spec.
     
    Last edited: Jun 7, 2018
  2. MileHighDart

    MileHighDart FABO Gold Member FABO Gold Member

    Messages:
    2,914
    Likes Received:
    1455
    Joined:
    Jun 3, 2004
    Location:
    Lyons, CO
    Local Time:
    2:11 AM
    .
     
    Last edited: Jun 7, 2018
  3. PST

    PST Marketing Manager FABO Vendor

    Messages:
    756
    Likes Received:
    188
    Joined:
    Apr 22, 2009
    Location:
    Montville, NJ
    Local Time:
    9:11 PM
    The torque on the strut rods at the bushing end is 45ft lbs and at the control arm it is 105 ft lbs. You will need to remove the torsion bars to remove the lower control arms to get the strut rods out.

    Thanks
    James KIMG2328.JPG KIMG2329.JPG
     
    • Thanks! Thanks! x 1
    • Agree Agree x 1