Stupid Question, Please take it easy on me!

[72DartGuy]

I have a 904 trans with a floor shifter in my car. I’m going to change it to a 727 when my new motor is built. Here’s my stupid question. Is the shifter linkage the same on both trannys? I’m putting a center console in and need to know if I can do it now or if I need to wait for the 727 trans. Thanks guys!

 

[Mopar44134]

shifter linkage is the same.

 

[rumblefish360]

It’s a bolt up and go with the linkages.
EZ - PZ

 

[72DartGuy]

Bitchin! I’ve accidentally wound up doing a couple of things twice. Thanks guys!

 

[toolmanmike]

I have a 904 trans with a floor shifter in my car. I’m going to change it to a 727 when my new motor is built. Here’s my stupid question. Is the shifter linkage the same on both trannys? I’m putting a center console in and need to know if I can do it now or if I need to wait for the 727 trans. Thanks guys!

Going from a small block to a big block?

 

[72DartGuy]

Going from a small block to a big block?

No, goin from a 225 slant to a 408 Stroker. Hoping to get it in by spring. The whole drivetrain is getting changed out. It will pretty much be a new car when I’m done

 

[GTX JOHN]

You will require a different driveshaft for the swap.

 

[72DartGuy]

You will require a different driveshaft for the swap.

Yeah, I’ve got a new rear end too. Goin with a 8 3/4 with a 489 case with posi and 3:73 gears. It’s gonna be something!

 

[4spdragtop]

Bell housings different? Arent 727 sb kinda hard to find? I'm sure you've looked into it, but just in case.

 

[RustyRatRod]

Nuthin stupid about it. All I can add is make DANG sure your shift cable is routed away from exhaust. The results from not doing that would suck. lol

 

[72DartGuy]

Bell housings different? Arent 727 db kinda hard to find? I'm sure you've looked into it, but just in case.

Sorry, what’s a DB? I have the right trans for my block. It’s a 360 stroked. Did I miss something?

 

[72DartGuy]

Nuthin stupid about it. All I can add is make DANG sure your shift cable is routed away from exhaust. The results from not doing that would suck. lol

Runnin dual exhaust I’ve got Flowtech long headers

 

[RustyRatRod]

Runnin dual exhaust I’ve got Flowtech long headers

Then make SURE to keep that cable off everything!

 

[4spdragtop]

Sorry meant sb(small block), gonna go back and edit...

Sorry, what’s a DB? I have the right trans for my block. It’s a 360 stroked. Did I miss something?

 

[72DartGuy]

Sorry meant sb(small block), gonna go back and edit...

Oh, I got it with a 340 block for $1K. It was on the 340 when it worked. I sold the block for $1200 and kept the trans. Couldn’t get the cylinders honed on the 340 block

 

[ir3333]

You can't have a mopar "posi"...but maybe a sure grip.
Why does that bother me when a mopar centre section is called a chev nickname?

 

[72DartGuy]

You can't have a mopar "posi"...but maybe a sure grip.
Why does that bother me when a mopar centre section is called a chev nickname?

That’s funny, it’s just what the rear end guy called it. This is my first Mopar project so I’m usually a combination of surprised or confused!

 

[ir3333]

You're fine...the problem is me lol!

 

[clementine]

You're fine...the problem is me lol!

Im glad it was someone else this time. Ha Ha!

 

[harrisonm]

First, that was not a stupid question.
Second, you're REALLY going to regret putting in the stroker. Your gas mileage is going to drop significantly.

 

[72DartGuy]

First, that was not a stupid question.
Second, you're REALLY going to regret putting in the stroker. Your gas mileage is going to drop significantly.

Thought I’d use the carb from the slant!

 

[j par]

Thought I’d use the carb from the slant!

Disagreed! LOL... Now you're going to want two carbs... To feed that stroker . ..

 

[halifaxhops]

You can't have a mopar "posi"...but maybe a sure grip.
Why does that bother me when a mopar centre section is called a chev nickname?

 

[j par]

View attachment 1715987182

Did you ever see the episode of Batman when Robin got his driver's license Batman gave him a brand new convertible barracuda?...

 

[72DartGuy]

Disagreed! LOL... Now you're going to want two carbs... To feed that stroker . ..

2 one barrels, right? Gas is expensive here! Maybe I can find a 3 Pack manifold!