Throttle cable question

[Paul Davidson]

I have a 408 with a edelbrock air gap manifold and a 1 in. spacer and a sniper my question is what throttle cable should I use.
The car came with a 273 commando and it's a 4 spd
The original cable is very stiff and seams short for my application I'm sure someone has a similar setup any help is greatly appreciated

 

[Professor Fate]

What car/year.
How long is your current cable?

 

[RAT ROD AL]

Approximately how long of one do you need ?

 

[Paul Davidson]

What car/year.
How long is your current cable?

67 barracuda

 

[Professor Fate]

And?
Can't steer you towards a longer cable if you don't say what length you need or at least how long your current one is...
Here's one to get you started. There's others, longer lengths from slant A bodies, B bodies, C bodies, trucks and others.
More Information for PIONEER CA8668

 

[Oldmanmopar]

There are three cable. I have a box of them and V8 4bbl is the shortest, V8 2bbl longer and slant six The longest, I used a 318 2bbl.

 

[Oldmanmopar]

I made the holder out of 2 from a truck

 

[Paul Davidson]

the outer sheild is 12 in. the cable is 18in.
what im looking for is someone who has done this and knows what cable they used

 

[Paul Davidson]

There are three cable. I have a box of them and V8 4bbl is the shortest, V8 2bbl longer and slant six The longest, I used a 318 2bbl.

View attachment 1716430285

View attachment 1716430289

thank you