Tire fitment on my 69 Cuda Minitub

[bccuda]

I have kind of got lucky over the years getting a old race car (shell) already with a minitub (fabricated tubs) and mounts done for leaf springs. Radiused wheel openings. I found a large bolt setup front and rear and wheels and tires to fit the need.
Assembled one side today and found it all fitting very well. thought I would share some pics and specs

325/50/15 MT street radials
5 X 4.5 B/S
15 X10 Weld draglight wheels with 5.5 back space
8 3/4 stock width

lots of work left on the car but looks very mean from the rear

thanks bccuda

 

[72BBSwinger]

Awesome!

 

[smlveightis]

Nice!! Plenty of room for rubber in the rear of the 2nd generation barracuda's!!

 

[ta3834bbl]

Got any more pics from the rear ? How about the interior . I would like to tub mine but I don't want to lose the interior. Got any good clear pics of the tubs on the inside ?

 

[bccuda]

I will try to take some pictures this weekend, the rear of the car is gutted, it had plexi windows. It was a well used and abused race car.

thanks
bccuda