Torsion bar installation

[awg329]

Just got the 1.03 torsion bars and wondering if it matters which end goes into the lower control arms ? The end with the numbers ? Does it matter which end goes where ?
Thanks, Alan

 

[72bluNblu]

Just got the 1.03 torsion bars and wondering if it matters which end goes into the lower control arms ? The end with the numbers ? Does it matter which end goes where ?
Thanks, Alan

it doesn’t matter which end goes forward, just make sure the left bar is on the drivers side and the right one is on the passenger side.

I generally put the numbers or any L/R markings on the bar so that they face to the rear, because then you can see the numbers later if you need to reference them for something. For example, if you have a ride height problem you can just look and see that the L/R bars are on the correct side, instead of second guessing whether or not you did it right.

 

[awg329]

it doesn’t matter which end goes forward, just make sure the left bar is on the drivers side and the right one is on the passenger side.

I generally put the numbers or any L/R markings on the bar so that they face to the rear, because then you can see the numbers later if you need to reference them for something. For example, if you have a ride height problem you can just look and see that the L/R bars are on the correct side, instead of second guessing whether or not you did it right.

Thanks for the help ! That makes sense.