[WANTED] W2 Cylinder head Wanted

-
Status
Not open for further replies.

Duane

Well-Known Member
Joined
Sep 29, 2009
Messages
2,001
Reaction score
876
Location
Ontario Canada
Rating - 0%
0   0   0
Contact seller
Looking for a long valve w2 race head 810 last 3 digits part number with Milled rocker stands. Must have never been ported. Open chamber no smaller than 67cc preferably larger.. Just need bare casting.
Reasonably priced.

Thanks
Duane
 
Unfortunately, the only set I have that meets that description have been ground some in the exhaust ports (only), but they appear to have never been run.
Do you have any pics you could send. Exhaust port only grinding is probably ok. I want my porter to do the intakes.
 
Looking for a long valve w2 race head 810 last 3 digits part number with Milled rocker stands. Must have never been ported. Open chamber no smaller than 67cc preferably larger.. Just need bare casting.
Reasonably priced.

Thanks
Duane
Bump
 
Status
Not open for further replies.
-
Back
Top