[Found!] WTB 72 Duster Hub

Cars and Mopar Parts Wanted

Thread Status:
Not open for further replies.
  1. =Max Wedge=

    =Max Wedge= Well-Known Member

    Messages:
    89
    Likes Received:
    13
    Joined:
    Jan 17, 2014
    Location:
    Ohio
    Local Time:
    8:00 PM
    Contact Seller
    WTB, front hub for 72 duster. 10 inch drums. small bolt pattern. MUST be in real good shape. Please send photo and what you wanting with shipping. Thanks in advance.
     
  2. Oldmanmopar

    Oldmanmopar Going left turning right FABO Gold Member

    Messages:
    7,315
    Likes Received:
    2751
    Joined:
    Jan 8, 2009
    Location:
    Danielsville Pa.
    Local Time:
    9:00 PM
    Are you interested in a complete like new drum with hub? If so I will post a picture on your thread
     
  3. zigs

    zigs FABO Gold Member FABO Gold Member

    Messages:
    2,190
    Likes Received:
    264
    Joined:
    Apr 10, 2010
    Location:
    Yakima, Washington
    Local Time:
    6:00 PM
    70 same as 72
     
  4. =Max Wedge=

    =Max Wedge= Well-Known Member

    Messages:
    89
    Likes Received:
    13
    Joined:
    Jan 17, 2014
    Location:
    Ohio
    Local Time:
    8:00 PM
    Awesome, thanks for the info. I wasn't too sure if they were different.
     
  5. =Max Wedge=

    =Max Wedge= Well-Known Member

    Messages:
    89
    Likes Received:
    13
    Joined:
    Jan 17, 2014
    Location:
    Ohio
    Local Time:
    8:00 PM
    Hi ManMopar, I would need both sides. I'm not saying no for now, would you send me the photos and info in a PM. Then I can send you my phone Number? Thanks sir.
     
  6. zigs

    zigs FABO Gold Member FABO Gold Member

    Messages:
    2,190
    Likes Received:
    264
    Joined:
    Apr 10, 2010
    Location:
    Yakima, Washington
    Local Time:
    6:00 PM
    I'm not saying its the same . I'm asking if its the same.
     
  7. zigs

    zigs FABO Gold Member FABO Gold Member

    Messages:
    2,190
    Likes Received:
    264
    Joined:
    Apr 10, 2010
    Location:
    Yakima, Washington
    Local Time:
    6:00 PM
    I just pulled spindles and hubs from my 70 Duster. I'm in the process of cleaning them for sale. I have all hard ware minus flex hose. Hub casting measurement # is max 9.90
     
  8. =Max Wedge=

    =Max Wedge= Well-Known Member

    Messages:
    89
    Likes Received:
    13
    Joined:
    Jan 17, 2014
    Location:
    Ohio
    Local Time:
    8:00 PM
    Im not too sure if there the same or not on those. Is their any body else on here that could assist with some knowledge on this? Thanks sir.
     
  9. zigs

    zigs FABO Gold Member FABO Gold Member

    Messages:
    2,190
    Likes Received:
    264
    Joined:
    Apr 10, 2010
    Location:
    Yakima, Washington
    Local Time:
    6:00 PM
    I should know in a little bit. Anytime you need advise go to the tech forums
    scroll down to the appropriate heading and ask your question. People on here are good about helping.
     
  10. zigs

    zigs FABO Gold Member FABO Gold Member

    Messages:
    2,190
    Likes Received:
    264
    Joined:
    Apr 10, 2010
    Location:
    Yakima, Washington
    Local Time:
    6:00 PM
    OK as I thought. 70-72 the same . 1973 was the change up to big bolt pattern.
     
    • Agree Agree x 1
    • Oldmanmopar

      Oldmanmopar Going left turning right FABO Gold Member

      Messages:
      7,315
      Likes Received:
      2751
      Joined:
      Jan 8, 2009
      Location:
      Danielsville Pa.
      Local Time:
      9:00 PM
      73-74 was only big bolt with disc brakes. Drum brake cars were small bolt. I never saw a big bolt drum a-body car all big bolt a-bodies were disc. although I am sure someone on this site owned one. Lol
       
      • Like Like x 2
      • gregpurcell

        gregpurcell Greg Purcell

        Messages:
        2,033
        Likes Received:
        155
        Joined:
        Aug 21, 2008
        Location:
        Near Savannah, GA
        Local Time:
        8:00 PM
        you have not said which side you needed. Most had left hand threads on one side and right hand on the other.
         
      • Mr. Sinister

        Mr. Sinister Devastation Manager FABO Gold Member

        Messages:
        572
        Likes Received:
        253
        Joined:
        Mar 3, 2017
        Location:
        Lenox, Mich.
        Local Time:
        8:00 PM
        NO left hand threads in 72'
         
      • =Max Wedge=

        =Max Wedge= Well-Known Member

        Messages:
        89
        Likes Received:
        13
        Joined:
        Jan 17, 2014
        Location:
        Ohio
        Local Time:
        8:00 PM
        Hi All, need both sides. Thanks
         
      • zigs

        zigs FABO Gold Member FABO Gold Member

        Messages:
        2,190
        Likes Received:
        264
        Joined:
        Apr 10, 2010
        Location:
        Yakima, Washington
        Local Time:
        6:00 PM
        IMG_20191010_120259454.jpg IMG_20191011_150036239.jpg IMG_20191011_150000107.jpg IMG_20191010_120237502.jpg
        Shipping will kill ya IMG_20191011_150036239.jpg IMG_20191011_150000107.jpg
         
      • barracudakid

        barracudakid FABO Gold Member FABO Gold Member

        Messages:
        4,953
        Likes Received:
        267
        Joined:
        Mar 12, 2009
        Location:
        king nc
        Local Time:
        9:00 PM
        I have 2
         
      • Oldmanmopar

        Oldmanmopar Going left turning right FABO Gold Member

        Messages:
        7,315
        Likes Received:
        2751
        Joined:
        Jan 8, 2009
        Location:
        Danielsville Pa.
        Local Time:
        9:00 PM
      • zigs

        zigs FABO Gold Member FABO Gold Member

        Messages:
        2,190
        Likes Received:
        264
        Joined:
        Apr 10, 2010
        Location:
        Yakima, Washington
        Local Time:
        6:00 PM
        Came off my 70 Duster with front drums
         
        Last edited: Oct 11, 2019
      • Oldmanmopar

        Oldmanmopar Going left turning right FABO Gold Member

        Messages:
        7,315
        Likes Received:
        2751
        Joined:
        Jan 8, 2009
        Location:
        Danielsville Pa.
        Local Time:
        9:00 PM
        HE IS LOOKJNG FOR 10 INCH DRUMS FOR A V8 CAR. THOSE ARE OFF OF A 6 CYLINDER.
         
        • Like Like x 1
        • gregpurcell

          gregpurcell Greg Purcell

          Messages:
          2,033
          Likes Received:
          155
          Joined:
          Aug 21, 2008
          Location:
          Near Savannah, GA
          Local Time:
          8:00 PM
          Well there you go then. You can't use 67-71 hubs unless one side has been re studded. Be careful
           
        • barracudadave67

          barracudadave67 FABO Gold Member FABO Gold Member

          Messages:
          1,021
          Likes Received:
          370
          Joined:
          May 22, 2004
          Location:
          Burlington, Wi.
          Local Time:
          8:00 PM
          I have a set of 10 inch front drum hubs/spindles bearings.
          PM sent
          Dave

          20180718_135437.jpg

          20180718_135329.jpg

          20180718_135450.jpg
           
        • zigs

          zigs FABO Gold Member FABO Gold Member

          Messages:
          2,190
          Likes Received:
          264
          Joined:
          Apr 10, 2010
          Location:
          Yakima, Washington
          Local Time:
          6:00 PM
          I guess I missed that part of it.
           
        • =Max Wedge=

          =Max Wedge= Well-Known Member

          Messages:
          89
          Likes Received:
          13
          Joined:
          Jan 17, 2014
          Location:
          Ohio
          Local Time:
          8:00 PM
          Found a set, Thank you all for the info and help. Much appreciated.
           
        • toolmanmike

          toolmanmike FABO Staff Staff Member FABO Gold Member

          Messages:
          42,931
          Likes Received:
          25979
          Joined:
          Jan 18, 2006
          Location:
          Iowa
          Local Time:
          8:00 PM
          Please mark the thread "found" just below the title. Thanks
           
        • =Max Wedge=

          =Max Wedge= Well-Known Member

          Messages:
          89
          Likes Received:
          13
          Joined:
          Jan 17, 2014
          Location:
          Ohio
          Local Time:
          8:00 PM
          Still new to this site sir, how can I process that?
           
        Thread Status:
        Not open for further replies.
        1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
          By continuing to use this site, you are consenting to our use of cookies.