Stop in for a cup of coffee

-
ScampMike said:
LOL - brake line adapter - need to finish the M/C install on the Scamp - got the bracket and the booster in and good to go
Click to expand...
Cut and re flare the line the adapter will look like crap on your cat. I am sure the parts store will have the right nut for the line.
 
I was actually thinking Mike the adapter you need is a male flared for the master, that will be fun to find I am sure I went through that and just put the right nut on the line.
 
LOL

The-Gruffalo-on-Hopster1.png


Hopster3.jpg
 
First cup then go from the third I guess, Got a bunch of dist parts in yesterday prob put a few dizzies together do not have any RB ones done yet.
 
Just scored a B&M flexplate Ebay $29.50 shipped. Some on here think they're gold plated instead of cad plated
 
halifaxhops said:
Cut and re flare the line the adapter will look like crap on your cat. I am sure the parts store will have the right nut for the line.
Click to expand...
I am considering redoing the two lines to the M/C - we'll see.. today after work will be an oil change on the truck and some time spent getting that dang scooter figured out - I checked the chargers this morning and they are both showing fully charged. After that I have to pack - for me this is last minute - I am usually done days in advance so I have time to think if I have forgotten anything.
 
ScampMike said:
I am considering redoing the two lines to the M/C - we'll see.. today after work will be an oil change on the truck and some time spent getting that dang scooter figured out - I checked the chargers this morning and they are both showing fully charged. After that I have to pack - for me this is last minute - I am usually done days in advance so I have time to think if I have forgotten anything.
Click to expand...
You will only lose around a half inch of the old line if you have enough there, that adapter will be hard to find, I went through the same thing.
 
halifaxhops said:
You will only lose around a half inch of the old line if you have enough there, that adapter will be hard to find, I went through the same thing.
Click to expand...
yea - if I have to cut and reflare I will - just annoyed with the GD thing right now.. doing the "stubborn New Englander" thing... :D
 
GeorgeH said:
Just scored a B&M flexplate Ebay $29.50 shipped. Some on here think they're gold plated instead of cad plated
Click to expand...

Let's hope it's not warped. My buddy Josh had ordered one off eBay that was warped. Naturally no returns and b & m wouldn't exchange it since it was sold by private party (not that I blame them)
 
Hey George any recommendations on how to easily fix heavy corrosion on cast aluminum? No pressure on it is the top sign on the new sun tester I got thinking some kind of epoxy putty?
 
ScampMike said:
yea - if I have to cut and reflare I will - just annoyed with the GD thing right now.. doing the "stubborn New Englander" thing... :D
Click to expand...
So cheating to win football games?:poke:

How's that help solve it :realcrazy:
 
dukeboy_318 said:
Let's hope it's not warped. My buddy Josh had ordered one off eBay that was warped. Naturally no returns and b & m wouldn't exchange it since it was sold by private party (not that I blame them)
Click to expand...
He swore up and down it wasn't, but that doesn't mean much. I see when it gets here.
 
dukeboy_318 said:
Let's hope it's not warped. My buddy Josh had ordered one off eBay that was warped. Naturally no returns and b & m wouldn't exchange it since it was sold by private party (not that I blame them)
Click to expand...
Well ain't you just a f'n wet blanket. Lol
Good Morning
 
You must log in or register to reply here.
-

Back
Top