roccodart440
Well-Known Member
- Joined
- Apr 19, 2010
- Messages
- 6,812
- Reaction score
- 3,595
Well, the time has come. I wiped a lobe off the cam after 20 years of service.
Good news is I have a set of fully ported eddy rpm heads done by jim laroy and a custom comp solid roller that have been sitting in closet for about 2 years.
So I'm yanking the engine and having everything checked. The new heads, cam and did I mention ported victor intake are going on my 440. Should wake it up a bit.
What is the best roller rocker going? My machinist recommended a bushing type, not a needle bearing style.
Good news is I have a set of fully ported eddy rpm heads done by jim laroy and a custom comp solid roller that have been sitting in closet for about 2 years.
So I'm yanking the engine and having everything checked. The new heads, cam and did I mention ported victor intake are going on my 440. Should wake it up a bit.
What is the best roller rocker going? My machinist recommended a bushing type, not a needle bearing style.