Thanks for the replies, everyone helped a lot. I went with the 360 heads and had them decked 0.030". We'll see how it goes when I get them back from the machine shop. Thanks everyone!
Thanks for the response! But yes I think I'll spend my money on the 360 heads and go from there. I'm just looking for a mild street car but I wouldn't want to wast money on the stock heads only to throw them away when I go to add performance later on. But thanks for the advice, appreciated!
Thank you so much for this this helped a lot and I've brought my heads to the machine shop, getting a valve job and their shaving 0.030" off the head. I'll cc the heads before I put them on to get an idea and I can't afford a cam right now so I'm staying with the stock one but at some point I...
I will have to see what it would cost, but I don't have a ton of money right now I'm just using left overs laying around the garage for most of it. I have an edelbrock rpm airgap Intake I'm going to use, some brand new hedman headers that never ended up getting used and I have a Holley 650 that...
Thanks for the help. I've been reading a bunch on it and everyone seems to have a different opinion on it. my biggest concern is money right now and I really just want the car back on the road and if its worth it to cut the head down i'll spend the money.
I have a 318 that has been sitting around a while and I planned on just freshening it up to put in my 72 valiant. I had an intake and headers from other projects that I planned on using so I pulled the intake, and exhaust manifolds off. I discovered that a few valve seals were junk. I decided to...
looking for an 8 3/4 a body rear end. preferably a complete rear end. doesn't matter the gearing, let me know what you have. Mass/RI/NH area only please.
okay so i need to
-lighten up bottom end
-mill block,head, and bore it
-get a good torque converter
-get shorter gears
okay those all sound pretty reasonable, thanks for the help!
14.7 is pretty darn good for 190hp lol. im hoping for just a little over that. i need to get an 8 3/4 and im thinking 3.91 or 3.73 somewhere in between streetable and drag
okay that pretty good because thats what im hoping to get. so how much is a FiTech and is it worth it? arent those like a grand? and thats gotta be cool with a 4 speed haha. i just bought a reverse manual valve body for my 904.