Search results for query: *

  1. rumblefish360

    [FOR SALE] TQ Carb 6453S

    That would be correct. ‘74-360 automatic trans.
  2. rumblefish360

    [FOR SALE] 1971 383 TQ Carb

    That is the over the counter replacement TQ for any make model squarebore carb pad intake manifold. This TQ has the correct MoPar throttle arm. It was called the big gulp by an engine tester. It normally stated as a 800 cfm carb. It has the small 1.38 primaries. Good price, GLWS, it should go...
  3. rumblefish360

    Thinking of switching from M1 single plane to LD340 but LD340 would need to be milled to fit. Is it worth it?

    Gotta agree with this. Being that the M1 was an upgraded copy of the Holley Strip Dominator and retaining the spreadbore carb pad for ease of the regular guy to just swap on the TQ and class racing that demanded the stock carb be used, it’s not a bad intake at all. The Edelbrock Victor is just...
  4. rumblefish360

    Bob's Component Resto Part 36: Dusty gets a new motor, chapter one.

    WOW! That’s wacked. I wonder what’s up with that craziness? OK cool man. Thanks.
  5. rumblefish360

    Happy Birthday AJ\FormS

    Happy Birthday! Hope you have a great day!
  6. rumblefish360

    FAIL right out of the package.

    I coulda
  7. rumblefish360

    Florida sniper does it right

    Truth! Facts! ^^^^^^^^^
  8. rumblefish360

    FAIL right out of the package.

    20 YO and still a quality part. Nothing new here and bragging about a 20 YO part? Pfst!
  9. rumblefish360

    Shocks: looking for Blistein quality at KYB price.

    Nothings in a bunch. But your reply is a tiring one and further replies just make me thing your a female that just wants to start **** by keeping the gum’s flapping. So far, you seem to want and like to stir the pot. Is there a third reply? More talking crap? Complaining? Hair splitting? An “I...
  10. rumblefish360

    Florida sniper does it right

    And that’s why I’m here in Florida and not in New York.
  11. rumblefish360

    Florida sniper does it right

    FAFO. Darn sad thing the guy would give it all up being cornered like that he should have realized the game was up and he was a looser. Now, he’s just dead. I’m just glad the bank tellers are fine.
  12. rumblefish360

    Shocks: looking for Blistein quality at KYB price.

    OK, whatever! I found them under that price. If $604 - $624 or whatever you found is breaking your bank, ignore my posts.
  13. rumblefish360

    Shocks: looking for Blistein quality at KYB price.

    Summit but you can do better if you poke around
  14. rumblefish360

    “Budget” Suspension Build Input

    Indeed! I did the poly graphite bushings. No squeaks, nice and tight feel. On the wife’s ‘67 Cúda, I went with standard QA1 on all 4 corners. We like it. Bushings are rubber. Once there shot, I’ll do poly graphite. Simple but upgraded. Nothing fancy, just better.
  15. rumblefish360

    Wasn’t someone looking for a W2 intake.

    Thanks. He does the videos from his Driod phone. I do have the W2 porting templates. He did the work first. We talked about it and it basically went like this. Charlie (C) You have a set of W2’s? I’ve never seen a set up close. Are you porting them? Who’s doing the work? I’d love to take a...
  16. rumblefish360

    Wasn’t someone looking for a W2 intake.

    The templates do a good job to start you out. There not a full porting template set for a maximum return or ability. A few people, often those who have done a fair bit of porting, have bashed the MP porting templates which I think is unfair to others that have never or lightly ported heads...
  17. rumblefish360

    Wasn’t someone looking for a W2 intake.

    That would be correct. To make things more difficult, using a tube to sleeve the pushrod hole isn’t an easy thing to do since there not a nice round machined hole. But it’s possible to use a brass tube and then fill the space with an epoxy. JB weld or other. The pushrod pinch is NOT the...
  18. rumblefish360

    Am I crazy or is this project Duster way overpriced?

    That’s the “I have MoPar Gold” sickness. The car has been given generous offers that I’d never give. The man is insane for his asking price and if he is stubborn enough, it’ll rust away into the ground.
  19. rumblefish360

    Is my ring gap too large?

    Better off with a wider ring gap, even if it seems ridiculous, than a tighter one.
  20. rumblefish360

    Trying out a spreadbore carb on the Duster.

    What your misunderstanding is that square bore carbs are not always exactly square between the front and rear. Typically, they are like the Holley is. 1.75 on all 4 barrels for example. The square bore is monkier is still applied when it’s like what you have shown. The spreadbore is a large...
  21. rumblefish360

    Struggling to find mufflers

    Drone is t always a muffler issue. Quite mufflers with a mello rumble? Dynomax turbo mufflers.
Back
Top