Search results for query: trim removal

So So correct me if I'm wrong but you want to repair the leak from the inside and not from the outside? If you are removing the trim and popping the glass out, it can be done without disturbing the interior. Inside will require significant but easily done removal of all the metal interior...

I have a nice set of Barracuda fastback window trim for sale. The passenger lower curved section has 2 small dents where they were too aggressive on removal. I included pics. This will make a great driver quality set. 350.00 obo plus any shipping. These are in Des Moines, Iowa 50316. I also have...

Front and rear glass out this weekend. Starting to remove all chrome trim. Pulled dash lose and ready for removal. Bucket Seat frame getting blasted and ready for primer.. Looks like the last time it was on the road in Denver it was going to college.. Haha

Im doing the body work & paint on a friends 66 dart gt. Found out that you have to take the rear window out to remove the outer stainless trim. Its held on by the inner window molding clips. What were they thinking ?

Thanks for the help and ideas everyone. I have an appointment Wednesday at Apple to pull the glass and try to fix it. The glass is fine and I intend to reuse. The seal around the window was recently installed new by the previous owner after the new quarters were installed and car was painted...

I may have found a donor parts car to get the mid level trim (shown in picture in red) for my Dart. How are these pieces brittle pieces removed without damaging them? Is there a tool?

Seems like glass removal would be needed to get to clips. They are behind the rubber seal a ways, dunno if its possible to peel back and swap.

Well I have horrible news. UPS destroyed my trim in shipping. I believe they are now bent beyond repair. Bent back opposite of the factory bend with some cuts in the edges. I have a claim filed with UPS and am waiting to hear from them. The ding removal, staightening and polish work done by The...

Any trick to getting these off. The passenger side came off easy, the driver side is stuck. Feels like i will bend it if i pull to hard.

Not an A body, but I know there are knowledgeable body techs on here. 2007 Accord- the "Accord" emblem has come off of the trunk a couple times. I have used 3M trim adhesive, but never did it correctly. Meaning, I've never removed the old adhesive, I just added more, and it comes off...

All buttoned up after the removal of the stereo, ashtray assembly, heater controls and glove box. I probably wouldn’t have had to remove all this, but I had some electrical sketchies that I wanted to deal with while I was in there anyway. The Classic Auto Air instructions said to remove the...

There are clips get a trim removal tool

I have been searching, but couldn't find how to remove the trim that goes around half of each headlight and the bottom of the grill on a 1965 Dart. Is the trim pushed on from the front over clips, or are they screws / nuts in the back? The trim is in 3 pieces; one for the right, one for the...

...anyone to paint yet - at this point, I'm leaning towards just finding a regular shop to block and paint it - I've done all of the trim removal, not much more left to do than get a good surface to paint and do it. Can't find anyone locally with any interest/availability. One shop refused...

Thanks. I figured. Guess the lower ones rusted to oblivion.

OK real dumb question.. Can the rear glass on a fastback be reinstalled 100% from the top side? this car has massive tubs and a monkey bar cage in it with a X brace. I am debating on going with Lexan and using rivet's part for that race car look. and part because I am fretting installing that...

Remove the crank, use a putty knife (or panel removal tool) slipped behind the panel to feel for the clips and lever them off, starting at the bottom — the top edge of the panel is tucked into the slot of the horizontal stainless trim piece at the top. When installing, tuck the top in first...

Get a clip removal tool, watch a youtube video on how to do it and then remove the trim, inspect the windshield area. You may find you have holes rusted right into the interior of the car...or you may just need a few new clips. I would clean it all up and brush a urethane sealer over the...

I have a 73 Duster & want to replace all of the window sweepers/cat whiskers, inner & outer. How are they attached to the plastic upper door pieces? I see the metal channels they are attached to, but not sure if they are removed with the sweepers OR the sweepers are removed FROM them. I don't...

It missed the shed, just scratched the corner trim. Looks like it’s just a big *** branch or part of the top. The tree removal will be on my landlord. The fence and shed are mine so thatd be on me.

Hello, what is the proper method / process for removing #s 10, 12, 13 from this illustration...... I want to buff and remove overspray on mine... but don't want to break clips etc in the removal process. Thanks!

Well damn, heres pic, looks like for whatever reason, it's short. Aesthetically I wasnt happy with it, plus with my dash coming out(requiring ws removal) I decided to replace with 68/9 style SS trim. Now $50 if interested or trade for 67 cuda stuff?

Windshield guy is coming out Sunday to remove the original windshield in our 67 fastback and upgrade to 68/9 stainless trim. This wont all be done in 1 day:lol: While windshield is out I need to remove entire steel dash frame with EVERYTHING(as much that can come out attached). I have a...

So sides and top are mocked up. Bought a trim removal tool to help with mockup(had to grind one tip to fit under clips. Overall I'm happy with how it looks so far. The fit on the corners seem good. Not too sure/happy with where the trim joins/overlaps. I'm reusing used/old clips, so not sure if...

...for that clip yet. Undecided how to minimize the "issue" there, so I drilled for middle and bottom on pass side. I still need to get the trim removal tool(absentminded). I found another bag of unknown new clips, that are taller than any others I have. In my mind this may be a benefit for use...

Hi, I'm looking for some info on the rear Vinyl Trim removal. I did a search but not a whole lot shows up. Maybe I didn't type the right keywords in?? I understand how the drip rail and front/rear glass works but I just can't wrap my head around the vinyl trim. I understand there are clips and...

I ran searches in this section and found nothing. Trying remove rear window trim. Which double trimmed. It has never been removed and there seems to be and adhesive that holds it on. Removed the bottom section which is a slip joint. Removed to quarter panel ridge which slips into the outer...

Hello, I am looking for the windshield trim for 1967 dart. I believe this was the only model year they had the 4 corners that pressed in. My corners are missing I am assuming from a windshield removal at some point. But I am looking for the whole trim kit if possible. A body shop told me the 68...

Going to buy a trim removal tool with the lever action handle (like the Glarks universal tool on amazon) rather than using the plastic prybar stule ones I have. I'll follow a technique I saw of using a thin piece of plastic slid between the trim and the tool to prevent scratching. Man -...

Just re-did the clips on a couple trim pieces and actually managed to take some pictures. I wasn't sure about a few things when I got started but it was pretty straightforward. I did the front quarter and the back quarter. Not the door. Rear quarter had one metal clip with a screw at the very...