Search results for query: *

Sorry found one.

Can some one please post a picture of the glove box hinge installed. I took mine off months ago and can't get it right. I have a 72 Swinger. Thanks

Yes I'm looking for just the rubber piece.

I have a 72 Swinger with the Board headliner and I am missing one black rubber coat hook. It is the type that slips over the white plastic support piece. Does any one know where to get this? Thanks,

I just bought from Summit the Pypes Violator Exhaust for my car. Does any one out there have this exhaust and how did it go on? And was it professional installed and welded? I have a stock 340 manifold with down pipes so I hope it matches to those. Any info will help. Thanks,

Here's the pic. Lines are not perfect but neither was factory.

I taped up all the red on the lights and shot it with some rustoleum black paint for plastic. I then went and got some model paint in silver and hand brushed the silver trim. It came out nice. Will post pics soon. Thanks for the help.

The Classic Industries carpet was barely molded and had uneven lines under the fire wall that was visible. Stock Interiors ACC is great got the mass back padding and it was molded to every crevice and looks great even got some floor mats and they are nice as can be. Glad I went with Stock Interiors.

My car is a Hamtramck car but yes, tons of seam sealer. I am doing to go the min but first rust encapsulate it and sound deaden then trim with carpet. Thanks for the info.

I have the whole interior done with dynamat and i just bought from Stock Interiors. They sell Auto Custom Carpets so hopefully they are nice. Thanks,

We'll I'm sending back the carpet. What fully molded carpet is the best fit. I am probably going to get the mass backing to aid in road noise and heat. Any input will help. Thanks

I want to re paint my 72 Dart Swinger tail lights. What paint is used for the black and the silver and has anyone done this job before? Its going to be a fun tape job in those small areas. Thanks,

In my 72 Swinger there is a absurd amount of seam sealer everywhere in the trunk. My rear window leaked at some point and rusted some areas in the trunk. I am now removing the seam sealer to insure all the rust is gone. My question is do i need to put all of this back on. The had seam sealer...

Question is where can a get that center bezel???

I have a Champion 3 core with Spal Low Profile Fan. Have not tested it on the road but have let it sit and idle with ac on for over 20 min and no isssues. Should have my interior done soon and will test it and let you know.

Thanks for all the info. A/C is complete and cold!!!

New alternator and battery installed. Thanks for all the help.

Sorry, It's a 72 Dart Swinger. Here is a pic. The area has Ben cut. Looks like the piece I would need extends all the way up to the heater controls.

I am redoing my interior on my 72 Dart Swinger. I just got in the carpet i ordered from Classic Industries and I am not impressed. Is there a molded carpet set that any one sells? What is the best carpet out there? Thanks,

I would like to reinstall a factory radio, unfortunately my dash has been cut to accept a single din. Is there a fix for this? I can do the metal work but the black trim piece that extends around the radio would need to be replaced. Is this piece available? Thanks,

I have a 1972 dart swinger with a 318. I added A/C and an electric fan and my stock alternator is not keeping up. I see a lot of choices out there: round back, square back , one wire connection etc. What do I need in size and style? Thanks.

I have a 72 Dart Swinger exterior is light green metallic and interior is the darker green. I'm doing the interior and want to repaint the interior pieces. What paint code are these colors? Thanks

I'm purchasing a Classic Auto Air set up for my 72 Dart that has a 318. I have a stock radiator that has been cleaned and stock fan with no shroud. What type of cooling changes do I need to make with the A/C installation. And any tips on installing the A/C would be greatly appreciated. Thanks,

I was looking at edelbrock. They have the performer plus cam that goes with my performer intake and carb. What about this one?

thanks for all the info. I was set to order the summit cam until I you tubed the Whiplash so next is to call Hughes and get some more info.

With buying the summit products you said earlier what else do I need to make this work?

A stock 340 Cam?

Looking to pep up my stock 318. I currently have an edelbrock 600cfm carb and edelbrock intake with 340 exhaust manifold and getting TTI exhaust. I want to add a cam to pep up the engine and add to the sound. What do I need To do this. If any one has a good combo with part numbers that would...

Looking to get my 318 rebuilt locally any suggestions. I live in South East Louisiana so any where close to New Orleans would work. Thanks,

I have aquired the vinyl top trim and hardware, but have a few questions. I am not going to put a vinyl top on since I plan a resto in the future and don't want to waste the money. I am going to plasti dip the top flat black. What is the best way to install the trim? My car was origonally a...