Search results for query: *

I'm getting ready to order 5.7 Hemi A Body headers from TTI. Does anybody know who has the best deal on them, or vendors supporting this site that sell TTI? Thanks, Jon

Does anyone have a list of where the hard heater hose pipes exit on each of the models? I'm looking for the best ones to use that will work with the 6.1 intake and give the best angle to the nipples on the classic auto air bulkhead where the blower motor would be on a '73 Duster. Thanks, Jon

Here is what I started with about 5 1/2 years ago. 1973 Duster 225supersix/904/7.25" It was sold to me as a solid, rust free southern car. After I bought it I got it running and driving and stopping with the running gear it came with and drove it that was for a few months, then went to a...

I'm considering selling my '72 Dart. I've had it for about 3 years now, but I could use the money to finish the Duster I'm working on. If you look in my post history you can see the car when I first got it as a 225cu/904/7.25" Around December '09 I did the swap to a B-Body 8 3/4 with a highway...

Does anyone have any pictures they can show me of their tail light brackets on their Demon? Evil340 was kind enough to email me one, but I'm still not 100%. Does a Demon have the brace that runs vertically from the trunk gutter down to the trunk floor extension like the Duster? Thanks, Jon

Does anyone have any pictures to share the the trans crossmember you're using for your tko? I'm in the process right now and I'm looking for an idea better than my own to borrow. Thanks, Jon

Does anyone here who's replaced a full quarter on a duster have any tips for the job? Will the flange on the sail panel slide out from underneath the roof seam once the welds are drilled? Is it also spot welded under the drip rail? Did you peel the upper trunk gutter up just enough to get the...

For Sale: Push in shifter handle that was in my Duster. I don't know if it's correct for an A body or not. $20 + Shipping Also have a pair of lowering blocks to even out SS springs. $10 + Shipping -Jon

For Sale: 11"x2.5" Big Bolt Pattern drum brake setup. Drums, Backing Plates, Shoes, Wheel Cylinders, & Self-Adjusting Hardware. There are no parking brake levers installed. The drums have some surface rust inside. Asking $175 + shipping. Compare to $375 on ebay...

For Sale: Pair (left & right side) of buckets out of a '75 Valiant 4 door. The seat backs don't fold forward, but can be modified to do so. The upholstery is in good condition and so are the seat tracks and the studs. Asking $350/obo. I think I still have the center seat/armrest, but it's pretty...

For Sale: Left & Right doors from a '72 Swinger w/ regulators, glass, and vent windows. They're disassembled, primed, and in good condition. I trucked these home from Fredericksburg from another member here for a local guy who said he wanted them and then flaked out. Asking $200 for the...

I have for sale a 3.55 ring and pinion and a sure grip for an 8 1/4 axle. I don't think it's ever been used. If it has it wasn't for long. I've been hanging onto it for 5 years but I don't think I'll use it now. One of the carrier bearings has a little surface rust from being on the garage...

I'm trying to find an air filter that is short enough to clear the hood on my Dart. I'm using the Mopar Performance finned air filter that uses a 12.5" filter. If I could find a filter that's about 12.5"x2" I'd be golden. I went to Advance and opened all of their boxes with no luck. Any ideas...

Does anyone know who sells the seals that go in the gas tank that the fuel filler neck goes into? 1972 Dart in the vehicle. I was getting gas this evening and starting pumping it onto the ground, I found the seal was split. -Jon

I had a little time to work on the car last night so I replaced the ammeter with this voltmeter. It's a 1 1/2" Autogauge that I got from Summit. Fits right in the hole, and requires little modification. -Jon

I plugged my cluster back in after doing the ammeter bypass and found that the two turn signal indicators and the high beam indicator in the dash will blink slowly when the parking lights or headlights are on. If the lights are off it doesn't do it. 1972 Dart non-rallye dash. Has anyone run...

Would someone point me to a wire under dash that has 12v only when the key is on and when the key is in the crank position. 1972 Dart 318. Thanks, Jon

What shocks should I get to use with SS Springs and a B-Body 8 3/4 on a '72 Dart? They need to be longer than factory A Body shocks, correct? Thanks, Jon

I'm trying to order longer wheel studs for the front of a '72 Dart with BBP '73 Discs, but I'm having trouble finding out what size I need. They're 1/2"-20 studs stock length at the moment and I'm looking to get about 3/4" longer to work with the Bullit wheels. Can anyone tell me what size knurl...

1972 Dodge Dart, Small Block, Overdrive 4 Speed- On the rod that connects the clutch pedal to the z-bar are there supposed to be any bushings in it? I put my clutch linkage together today after modifying the zbar to fit with the doug's headers and it still seems to have allot of slop in the...

Does anyone know what size and thread the bolts are the hold the flywheel to the crank on a stick shift 5.2 Magnum engine? I've misplaced the ones I had, so the sooner I buy new ones the sooner I'll find the old ones. Thanks, Jon

I've got a set of 4 Cragar S/S wheels on my Dart that are in pretty good condition. They're small bolt, 14" with decent no-name tires on them. What do you think a set of these is worth cleaned up? I'm switching to big bolt and won't have a use for these. Thanks, Jon

Came across this while surfing around: http://www.copart.com/c2/onSaleResults.html?_eventId=getLot&execution=e9s2&lotId=16652509 Estimated cost of repairs is only $10k. -Jon

Has anyone seen these going for sale? http://www.hotrodsusa.com/store/cf_ifs.html Looks allot like the RMS kit. Does anyone have any experience with them? I emailed asking a price a couple of days ago, but no one responded to me. Any ideas? Thanks, Jon

Does anyone have intake manifold bolts from a 318 magnum running around that they can measure for me? It's out of a '94 Grand Cherokee with the beer barrel intake on it. If you can give me the size, thread, and lengths I would appreciate it. Somewhere along the line mine got misplaced or someone...

Is there anywhere selling the bulb holder for the tail/brake lights in my 72 swinger? I've got one that the base of the bulb rusted to the holder and I need to replace them. Thanks, Jon

I'm looking around for a small block 904 that I can bolt up to a 318 LA I've got running around. I have come across a "good used" one from a 1990 Trailduster he says. Will any 2 wheel drive small block 904 fit in the a bodies or are there physical differences like with the 4 speeds? If that...

Anybody catch the episode of Street Customs where they were building the 67 barracuda? They hired Duane, the shop manager from Boyd Coddington's shop, who lasted long enough for the one build and quit on the next episode I saw. I'm not sure when they were aired because I had them recorded. Not...

This is a spin off from another thread I posted, but I figured I'd get a better response with a new topic... What do I need to make a power steering box from a 1973 Duster work in a 1972 Swinger with power steering? None of the parts stores can get a pre 73 box, and I've already got a new 73...

What's the difference between a power steering box from a 73 Duster and the one for a 72 Duster? Difference pitman arm? Is there a way to make them interchange? Thanks, Jon