Search results for query: *

I picked up a set of ported J 2.02 heads set up to run with a roller cam, also got the Erson cam that was used with them part # E420999. No lifters or push rods. I plan on using them on a stock stroke 30 over 360 with KB 107 pistons that I have. Grind says 298/422 and 306/422. I can't find...

I have just been figuring Fed Ex shipping at $75

I winter in San Antonio, I could bring one with me, already taking one to San Marcos

Mine are made in fiberglass from a mold made with an original NOS DC piece. They are just a hair thicker than originals. They are test fit to an original "Hang 10" deck before shipping. There are some fiberglass parts out there that may be cheaper but I take pride in my product. You can check...

Yes they are fiberglass. Fed Ex usually is covered by $75. The newer one with the rib is the only one for now. If I find an older deck I could modify!

They do have the ridge. For mounting hardware you would use any style 1/4 bolt you prefer, myself I would use a stainless Torque drive, but others may want something else. I Forgot to say to PM me if interested. I don't come here much but I get email notice n PM's.

Duster/Demon rear spoilers $250 plus shipping. From Iowa. The middle one is the NOS original I took the mold off. They are made in fiberglass

I have a guy looking for a pair of 10" SBP frt. drums or just hubs for a 65-72 A. His studs were loose & we welded them in solid but he wants a virgin pair. I figure if there should be some out there left over from a disc swap! Shipped to zip 50126. thanks

The counter & stools came from a local diner built in the 40's. You can see them in the original red in one of the lower pics. I got the STP patches off E bay & had a local upholstery lady stitch them up. It is fun when people come over to watch them look over everything, especially little kids...

You might see a theme here! The outside I call it "Possum Lodge"

Any pics of the stuff that goes along yet?

Would you sell the 4 bolt main kit?

check shipping to 50126 Iowa

So it is a 3 piece jig or 3 pieces that you can use individually depending what end needs attention? I guess what I mean does the full chassis sit on the main one or do the small ones attach to the main & the the chassis goes on the assembly. Any pics of the related parts yet? Does the car have...

Yes the missing headlight one was a convert. & I think the coupe was a 24?

I did this about 6 years ago. In the 70's a guy with a big car collection working to do a museum deal had some cars that were too good to just leave lay around in the weeds. He had an empty farm with a barn so he cleaned out the hay mow, (upper floor) cut a hole in the wall, laid some 40'...

Spindles & rotors were 73 C-body reworked to fit the ball joints. The caliper brackets were reworked for diff calipers also.

I have them cloned! $250 for both pieces! And yes I believe the bumper was changed @ a later date & the spoiler added. Like I said my picture is at least 10 @ maybe 15 years old! I just can't remember where I got it! Heck I could have even sold him one of my spoilers?

It's there you can just see a bit @ the back of the pillar, but there is plenty of "work" done on that pic!

Not A body but, this Kit Car was in many 2012 car type calenders & no one claimed that it was theirs. Well I was going thru a drawer full of old pics. At least 10 years & prob. older & found this pic. I didn't take it so I guess someone gave it to me or sent it to me. The plate looks like...

I see there is a set of frame rails in/on the car Do they need changed out or just included in the spare parts? Does it have obvious damage from major wrecks? Do you have any history on the car? Driver, race team etc. My un assembled one came from Calif too! Would be cool if it was the same...

3 piece front runs $175. Can mold in many colors. They fit pretty good the worst was where I had to put the tape but still closer than I figured!

I tried the F front on a 72 Demon over the weekend & was surprised it was as close as it was! This is a tube frame car with glass fenders but here are the pics. The rear spoiler tryout wasn't even worth a pic! He had already got rid of his original side windows does anyone have a set or can...

I tried the F front on a 72 Demon over the weekend & was surprised it was as close as it was! This is a tube frame car with glass fenders but here are the pics. The rear spoiler tryout wasn't even worth a pic!

I was looking in old Car Craft & Hot Rods last night. (78/81) In 1 page insert type flyer that had back window louvers & flares & stuff for all kinds of cars, I didn't see any A's but there were F's! The rear louvers were $129. There is prob the same adds in 74/5 Mags.

So, racer9190 do you have any pictures?

Here are the ones I make for F's the orange one is an original. I get $250 plus shipping. As you can see they are dead on! I'll try one on a Duster maybe this weekend & get a pic. If anyone has an original to loan I can do them!

NOPE NOPE NOPE!!!! Mine is NOT for sale!

I'll show you mine if you show me yours!

Like I said let me make a mold & pop some thin ones out & I'll check to see if my local guy still has his glass. If he doesn't he has a street car! I'll cut up my thin fiberglass ones & between my glass guy & me we will give it a try. Once done we can pop out as many as needed! (even in allot of...