Search results for query: *

I have two small block lakewood scatter shields with plates for sale. The black one has surface pitting on the block side flange and the plate from sitting for years but its cosmetic, it has been powder coated. the red one has a ding in the lower lip but it is also cosmetic and nothing is...

New in the box crane hydraulic roller cam, asking $325 plus shipping, thanks.

My buddy was building these for his stroker engine but before we got around to porting them he came across some cnc ported heads so these are up for sale. They were bought as bare castings and the local machine shop did a performance valve job, honed the guides and back cut the valves. They have...

Looking for some 340 mounts, thanks.

I'm looking for a 67-72 v8 k frame for my dart, hoping to find it somewhat local to the Portland/Vancouver/Yakima area, I also need some 340 mounts as well. I have cash or can trade a v8 spool mount k frame, a full set 15x6 and 15x8 big bolt mopar rallys etc., thanks.

Just curious if anyone here is doing it?. I am setting up my 72 dart with caltrac suspension, viking double adjustable shocks, a clutch tamer, 315 60 15 et street radial Rs and a 3.09 first a833. Looking for tens n/a and 9's with a 100 shot. mostly looking to have a good time but I may bracket...

looking to buy one for dyno testing and hoping someone has one they do not need, I would like to do a comparison between it, an air gap and an m1 on the dyno sometime before next spring!, thanks.

Looking for a set of centerline convo pro front runners, can be the really rare small bolt or large bolt pattern. Please let me know what you have, pm is best, thanks allot.

So I could not believe these are all in my garage at the same time, not all mine but I think I should buy a lottery ticket anyway!!!

New in the box hughes solid flat tappet cam for small block la mopar, $120 plus shipping from 98682 thanks.

Need a set of spool mounts for a 360 block/abody,schmacher is out of them for a few weeks, located in Wa state, thanks.

Looking for a complete set of black 72 dart door panels for hardtop, but will consider just the fronts or rear (mainly need the rear) thanks!.

I have a small bolt disc brake setup for sale, complete with spindles, brackets rotors valve and newly rebuilt calipers (never ran) with new pads. The parts are in Vancouver, Wa 98682 and I prefer not too ship but it depends on where your at. Will get pics soon, thanks. $350

Cleaning up the garage a bit and have a few small block parts for sale in Vancouver, Wa 98682. I do not want to ship but there are a lot of local fabo guys around me-maybe one might do it for beer :D. Scat 4" cast crank nib $325...

I'm looking for a set of .030 forged 360 pistons for the stock 3.58 stroke. I Figured I would see if someone had a good used/new set collecting dust considering how many change over to strokers :D. Thanks for looking.

Im looking for a solid floorpan and trunk floor for a 1970 duster from somebody thats fairly close.Any abody trunk pan from 67-76 will work and 67-69 barracuda floor pans or any 70-76 duster,demon/dart sport floor pan either (dont care about the catalytic convertor hump in 75 up).Im in...

Wanted to pass some info along,I noticed a couple threads lately stating the champion cc374 radiator would not fit an abody without cutting the lower support and since I wanted to use this radiator I did some checking.I borrowed one to test fit and it was too tall,the tank to tank measurements...

Custom factory fit 3 core triple pass radiator from cool craft,its the desert cooler series,this is a direct bolt in for use with a factory shroud.Im including the factory mopar 340 shroud thats in excellent condition,its off of a 71 340 duster.I had the radiator built a few years ago and it was...

Im looking for a set of 14x6 prostars (4.5 bolt pattern),thanks guys.

Im looking for a couple 15x8 weld prostars w/5 on 4.5 bolt pattern and 5.5 backspacing,only 5.5bs will work,thanks alot!.

I had this on the shelf for a while now and decided to sale it,very nice low miles holley double pump converted with a proform main body that I got from a buddy.Jetted 72/78 I believe with the 6.5 power valve,everything is like new,throttle shafts are tight,plates are not drilled,looks really...

Cleaning up a bit and found these on the shelf new in the box. http://www.summitracing.com/parts/SLP-E-286K030/ Asking $50.00 shipped to you from Wa. state 98682,thanks.

I have been tripping over this for a while and want it gone!,318 forged crank with balancer (rubber looks good) crank is all std but will need to be turned.Lighter crank than a 340 but in my experience it will balance with no weight added for use in a 340 with aftermarket pistons.Asking $75.00...

Nice shape,spares I had laying around,$50 plus flat rate,thanks.

Well its technically a mopar right?,this thing is like brand new powertrax locker for amc 20 rears,only $100 plus flat rate usps,thanks. summit http://www.summitracing.com/parts/PWT-1710-LR/ mine

Had a buddy ask me about these and I have no clue,anybody know anything about them?,price is good but who knows. http://cgi.ebay.com/ebaymotors/MOPAR-340-360-INTO-67-74-MOPAR-A-BODY-MOUNT-KIT_W0QQitemZ260572498115QQcmdZViewItemQQptZLH_DefaultDomain_100?hash=item3cab54c8c3

Looking for a driver quality sharkstooth grille,damaged is ok,thanks.

Stumbled across this not long ago,fun read for those who dont have the mag. http://www.moparmusclemagazine.com/techarticles/engine/mopp_0108_dyno_testing_small_block_intakes/index.html

Im looking for a used suregrip unit-either cone or clutch,I also need a cone type housing and cross pin/shaft if someone has a core and/or parts,thanks.

Hey guys,Ive been gone a while but searched for a post about Matthew after recently talking to his brother,Ive done buisness with Matthew for a while and have seen/talked to him several times.Let me say at this point he owes me money as well and it seems his brother is going to make it right,I...