Search results for query: *

I have a leak in the tailshaft on my 518 transmission, does anyone know if it the same seal used in the 727. It was in the car when I bought it. Looks like there is a boot around the seal. Thanks for looking.

2 stainless 2 1/2 inch never used plus hangers. Duster or Dart$200 plus the ride. Howell Mi 48843

Would like to buy one. Some are $700, some are over $1200. Are remanufactured grills any good. Classic Ind, Summit.

Restored the dash bezel on my 70 Duster, putting everything back together. I have rally gauges, can't seem to get the oil pressure gauge to work, was OK before. I have an mechanical gauge that is working, but the factory gauge is not. The other gauges in the dash, gas, temp seem to be OK...

Putting everything back together after having the bezel restored. Got just about everything working, new LED's bulbs, sockets, all gauges seem to be working except the oil pressure gauge. At first it was pegged to the high side, along with the gas gauge, but once the whole thing was grounded the...

Putting my dash back in my 70 Duster, had the bezel restored. I think I have all the wiring hooked up that I need to check that all my lights and gauges work, and thought I could start the car, but it won't. Thinking I'm missing a ground someplace. Took a lot of pictures when I started, hope it...

Two 15x6, two 15x7 steel wheels and four cop car caps. All in very good condition. $400

Having my rally dash bezel on my 70 Duster restored. I need to find a clip that holds the control cable to the control slider on the heater control. Can't seem to find one that looks like the one I need. Anyone have one, or know where I can find one?

Thinking about a Gear vendor under, overdrive for my 727 in my 408 Duster. OK around town 355 not a long haul gear. Sounds like a good upgrade.

Getting my Duster Rally bezel restored, when I get it back probably would be a good time to replace all the gauge lights. They all work, but seem a little dull. Anyway their 47 years old. Do they make factory replacements, better after market? Where is a good place to buy? Thanks Tony in Mi

I want to have my dash bezel restored, (not the gauges) found a place that will do the work. Not sure what needs to be to be done to remove just the bezel. (not the gauges) I see screws that need to come out, set screws that hold the slider heater control knobs. Not sure how the headlight and...

I have 4 steel wheels, 2 15x6 with 4in back space, 2 15x7 with 4 1/2 back space. 4 cop car dog dish caps All in very nice condition. $300 for everything. Will separate caps. Howell Mi

Anyone gone from manual steering to power? Didn't matter 30 years ago, but now it sounds good. I don't know what is needed, I know the power steering unit and pump, pulley, what about the steering shaft? and anything else I need to have. Any advise would be great. The car is a 70 Duster. Thanks

Mopar performance PN 4349043. Standard size. Never used. New condition $25 plus shipping Howell, Mi

Restoring a 72 Duster, anyone know the correct placement of the gold pentastar on the passenger lower fender? How far up from bottom of fender, center or off center of fender? Thank you

Complete set of Ductile adjustable rockers. Includes proper spacers and Banana groved shafts. Will work on LA heads, 273,340,360. Very good condition. $150 plus shipping Southwest Florida

I have a 70 Duster with a cigarette lighter, can I charge and use a phone and GPS in the lighter. Thanks Tony in Mi

Going to new Hughes rocker arms on my 408 stroker. Edelbrock heads and comp extreme hydraulic energy cam. 488- 491 lift. 230- 2360, 274-286 duration. Guy at Hughes said either ratio will work. I welcome any other input. Thanks Tony in Michigan

Anyone out there have DMH electric cut outs? Thinking about getting a pair for my 408 stroker. I know, lots of opinions out there. I have an x pipe set up, all TTI, not sure where they should go, between the header and x or after the x pipe. Any thought welcome. Tony in Mi

4 nice cop car center caps. $125 plus shipping, or best offer. Howell, Michigan

Summit brand with gauge. In the box with instructions Excellent condition. $35 plus shipping Howell Mi

Looking at roller rockers for my LA 360. Mancini sells made for Mancini by Harland sharp rockers. Anyone out there running them?

2 15x6 wheels, 4 in back space 2 15x7 wheels, 4 1/2 back space All wheels Small bolt pattern excellent condition Have more pictures $400 plus shipping Howell Mi

Challenger series, 13 1/2 in, walnut Grant #404 mopar 3314 installation kid included Bought used. not perfect, driver quality $40 plus shipping Howell Mi

Looking at the latest issue of Mopar Muscle, featured a nice 70 Duster with Coy wheels. Went on their site, prices are good, they also have nice small bolt pattern wheels, 14 and 15inch, old school look. Tony in Michigan

Looking to upgrade my 408 stroker with 273 adjustable non roller to roller rockers. Tops on my list are Hughes rollers, they go for $550. A friend who buys from Mancini says they sell aluminum roller rockers that are made for Mancini by Harland Sharp. I know the Harland rollers that are sold...

Small bolt pattern steel wheels 15x6 with 4in backspace. Made be DRZ wheels in Oregon $150plus shipping Located in Michigan

Did not know where to place this topic, let me know if it is not. This was brought up at a car gathering. Talk got around to E-85 and how it could cause problems if used in classic and muscle cars. I know most use premium gas, in Michigan almost all gas has 10% ethanol, not enough to cause...

Two 15x6, with a 4 in back space, small bolt pattern, 5 on 4, Made by DZR wheels in Oregon. Excellent condition. $175

Small sector manual steering box removed from my Duster. I bought a rebuilt last year but just now installing the new box. Changed tires from front runners to BFG radials, after I ordered the new box. really helped the steering Not much difference between the new steering box and the one I...