Search results for query: *

Listing this for a pal. Let me know condition and price. He specifically wants the (P4529743). Thanks.

I want to thank all of you who responded with the info on removing Hemi valve springs while the head was still on. It's really helped. May the Gods of the asphalt grant you low E.T.s, High top speeds and a safe return to the pits. Thanks again, The Cuda.

Hi, I'm looking for a tool to remove a valve spring off a 426 Hemi without taking off the head. Who makes one that won't break/works ? Thanks.

Actually I had ask my pal about that. We installed the plug behind No.7 that was (missing) and Walla ! It's got 80 lb. cold and 65 at idle hot with Rev Tech 20/50. Thanks

I want to thank everyone who posted and for there Good information the problem has been solved ! Through some misinformation/misunderstanding it was discovered that the plug behind number 7 is missing. Thank you all. Mystery solved !

Hi JOS----- I have a message for you but your in box is full. Thanks.

Thanks Jos---- The owner put the engine in his truck and when it was started this problem was noticed. He took the engine out. We checked everything. The engine is now back in the truck as we thought it was a set of bad lifters and or the oil pump. The plug below the oil sending unit outlet is...

Thanks 318. Wish this was a 318 there Bullet proof !! Thanks,, Were about ready to give up on this one. Never had to do that before. Just gotta be a crack inside. Aggravating as all hell because we want to see it run . It goes in a little Red Express pick up all restored,, real nice. Damm !!!!

The first oil pump we used was a new Chrysler the 2nd is a New Melling , both Hv pumps. We have Not checked the relief valve to be sure it was free in either one but,,, we will now. We did have the Chrysler pump pressure spring out and then reinstalled it and bumped that plug in a little farther...

We used a telescopic/snap gauge to check the lifter bores. All with in spec. The pan is a stock pan the pick up is stock with the recessed screen aprox. 1/4" the pick up is aprox. 1/4-3/8 " off the bottom of the pan. We ran it,, then. let it sit for aprox. 5 min. thinking the pan may be getting...

MoparOfficial Thanks. Yes the plug/plugs are all there. As far as the mag goes,,, No that wasn't done by us or the owner of this pile.

Thanks Jake, We disassembled the whole engine looking for those exact things and ALL the plugs are there. This is a strange one,, at least to us. Thanks.

360 sat for a long time. Engine is stock.We hot tanked it. Cleaned it out again, all good. Honed. New rings,rod bearings,mains, cam bearings and lined up correctly. All clearances .002 with plastic gauges. All plugs accounted for. 2 New hv oil pumps. 2 new oil filters. Primed with drill, 60 lb...

STRANGE ! I just called and got thru. I left a message and Jerry came home for lunch and he returned my call. He said phone worked last night and again this am ??????? Can't figure it.

''PHONE''IS NOW WORKING !!!!

Hi, thanks. The number on Craigslist is correct. The power was out here last night for 3 hours and must have affected his home phone line. He has no cell. I'll get in touch with the phone company. Thanks again and please call back.

In the Craigslist ad it's $3,500.00 complete but,,If you call Jerry, the phone number is on Craigslist you may deal. Also there is a typo on Craigslist. It says Gear Benders not Vender, ha. Jerry,the seller didn't put the ad on there another fella did.

On Craigslist Milwaukee. Type in "Transmission 727" I know the seller,he's a good honest person. The Trans. came out of his "67" 572 Hemi Barracuda. He also has a 7 second Dodge Daytona. Certified Mopar Technician for 35 years. Transmission is Fully Rollerized. The converter is a 3500 stall and...

Hi K, THAT,, is a Good point as we have experienced the "light shift" Thanks, Good info. D.y

Thanks ABJ, we'll take all that in to consideration. Ya it's a alum. radiator and the cooler orifices are,one on top the other on bottom oem was horizontal. After the radiator cooler it will go to a B+m cooler located in front of the radiator it's self. Running a rather loose converter and want...

Hi TB, thanks. we did know the front line was to the cooler but weren't sure if,, it really mattered if that line went to the top or bottom of the cooler it's self. We figured it didn't but,, once the lines are cut,, there cut. Thanks, D.y

Hi, this radiator has a integral vertical cooler. The 727 "to the cooler" line should go to the top cooler orifice or ?? Thanks, and buy,,"Made In U.S.A" We Always made the Best here. D.y

Hi, we need a complete set of seat rails or, even 1 side to fit a 67 bucket seat A body. Thanks, D.y

Thanks Dave, that's the info I needed. D.y

Can anyone tell me if the pedal operated A body clutch rod is the same length as the B Body ? Thanks, D.y

Sorry,, Ooops! , I found it !! 150lb Thanks, D.y

"67" A Body. Whats the torque spec. of the K-member to frame ?? 4 bolts. Thanks, D.y

Need this for a 1967 "A" Body. Replacing Torqueflite with a 4 speed and we need to buy the peddle set up, spring and rod too, if you have it, the whole shooting match. OR,, what have you...

Hi FB, The gears are 373:1 for now.We have the corn gas in this county but next door they still sell 91 oct. minus the corn, at least that's what we're lead to believe. Just a short ride but,there's a rather long stretch of straight country road where we do some WOT tests. rc-12yc that has been...

FOG,, pricey,, yes ! I would like to avoid that,ha. Trying to narrow this down sooo, it does not get to "pricey" as some of these plugs are higher n ah cats back. thanks, D.y