Search results for query: *

For sale 1967 Barracuda fastback: 1.03 torsion bars 383 727 8-3/4 with 3:23 sure grip 842 Nice Black paint - SS A pillar trim, SS window trim summer special gills w/Cadillac spears (SS) AC - tested & charged - 300 switch not turning on compressor - was waiting for 68 dash completion to bench...

I am hoping someone ran into this before. My drivers brake light and right turn signal not working Regular lights work Emergency flasher work on all three other corners Brake light works passenger side Put in new turn signal switch (heard that is sometimes problem) I see in schematics it is...

I have following hoping to trade for 1968 rally dash tach reproduction is fine: 68 grille inserts - spring special drive condition 1967 formula S rocker panel trim - will need polishing but nice otherwise - one has anodizing looking poorly

bryan Schaupp submitted a new Article: Torsion bar install Read more about this article here...

I have fairly complete dash I have been working on currently listed on Ebay for $1777 will consider offers it includes: FABO price $ 1500/BO New bezel and glove box trim cluster AC controls under dash AC vents - factory with trim Wiring - one attached that has bulkhead connector cut off and one...

Finishing my car and will not need hopefully fellow Mopar owner can use FREE can pick up or just pay shipping. should be under $ 15 most places

I ended up get ting reproduction wheel well trim. I collected 2 sets to use prior and no longer need. Will see them for $ 15 each or $80 for all. I can take additional pictures if interested. I can ship in box that reproduction pieces came in. These were bought over last few years all...

I am clearing out parts I am not using . Decided to go with the 68 rocker trim so will not be using these 67 trim pieces. Anodizing on one is tarnished but both are in good shape no dents or damage to speak of Look at pictures. $ 375 BO + shipping Sorry no hardware

I am finishing up my project and will have extra parts I collected. Here is three AC hoses 1 - one shown on car drivers side high pressure I believe. The hoses on car came off 1968 barracuda and seem to be in very good shape. I ordered components to make custom hose to replace this one. the...

Wanted to use these but car is almost done and will be using the 1969 seats I have. $ 475 or BO includes: 2 - bottom cushions as pictures 2 - top frames - one picture but includes two - all need upholstering and foam 4 bottom side trim with chrome - decent shape 2 hard backs with chrome trim...

Hoping to get 3-4 of the gray connectors used on Mopar harnesses that look like T - need male and female I have box of connectors somewhere but unable to locate and would like to finish loose ends. old harness rear body on barracuda fastback would have these and courtesy light bulb holders...

Selling AC dash vents wiring - everything as pictured with exception of glove box - was just set in there not correct year. very clean/solid with little to no rust has all dash pads - upper one consider core as it has damage/cracks etc. additional pictures upon request $ 220 plus shipping

I was going to put in my rear seat and I noticed the mount on one side was bent.Must have been damaged in shipping. Straightened it out and tried to operate and saw that the cam on one side was missing. Let me know if you have one it would be greatly appreciated. Let me know cost - passenger...

I am looking for factory mylar piece that goes in from of the door window and has guides/pins on both sides. I am looking for OEM as I have tried aftermarket and window binds. I am tired of taking in and out with the junk I have been getting. Please let me know if you have these for 1967...

Upper trim piece - 1 side only $ 15 Also upper door trim stainless both sides $30 Getting rid of parts not needed getting to end of my project Good shape headliner trim will send extra clips for this also Unfortunately Shipping will be around $18 will refund difference if less. - combined...

Getting to end of my project and selling items that will not be used Trim on the seat have been removed and sold Selling pair of seat frame with upholstery - no trim or tracks as they have been removed and sold $ 95 + shipping for pair

I have two dash pads for 1968 barracuda good steel cores 1- fairly cracked up $ 40 + shipping 1-small cracks may be repairable or used as is $ 60+ chipping 1968 dash assembly - radio sold includes : Frame, upper and lower pads - upper pad is cracked up core good AC Vents wiring - bulkhead...

I broke the track guide that bolts to the window frame. I will take complete assembly if you have one. The rollers were stuck and i tried to pry open a little and it broke. Hopefully one where the rollers spin freely Passenger side. Thanks in advance if you are able to help. Best regards, Bryan

I bought this not to long ago but have decided to polish my factory piece. this is like brand new. Selling for what I paid. possible partial/full trade for: cargo area carpet - console carpet, 383-S fender emblem(s). trying to get rid of parts I do not need or duplicates and get items needed to...

I am looking for supplier or good used clips for belt molding. I will need 18 of them if possible They are approximately 5/8 x 3/4 and have to have bend. they also have the foam sealer Attached are some pictures. This is next step in my build I hope someone will be able to help. Thank...

bryan Schaupp submitted a new Article: Installing new gas fill tube rubber seal A body 1968 barracuda floor pan Read more about this article here...

I just bought reproduction piece. this has some damage and will need to be polished and dents removed - please see pictures. Hoping someone can use. has two end clips. can do high resolution and more pictures upon request $ 25 + shipping thanks, Bryan

I am getting close to completing my car and selling off stuff I will not be using to help get parts I do need to finish Here are some items I hope someone can use: 1 - 1968 dash pad green - some small cracks - steel sore $ 70 1 - 1968 dash pad green cracked badly - good steel core $ 40 1 -...

Have both sides for 1968? perhaps 69 not sure and only one side for 1967 barracuda See photos for condition. as I put my project together I am selling off excess parts Hopefully someone can use for their project Will list on ebay if no takers by Tuesday Black panels have been painted -...

Just seeing if anyone can use. have listed on ebay selling extra parts I will not be using with my build they are; 2 kick panel dark blue $ 47.77 2- door panels - dark blue $57.77 1 - arm rest dark blue $ 19.77 1-arm rest blue $ 19.77 Here is link to kick panels check see other items to see...

I bought these for the spinners. ended up not using them See pictures for condition pretty nice but not perfect clean spinners and small scraps and/or scratches on caps $100 w/spinners and center emblems $40 w/o spinners + shipping

Have tracks and risers for 1964 or 1965 barracuda . Tracks came off 1966 seats I have posted pictures for you to verify and I can get any dimensions you need - just ask $ 277 + ride for all 8 pieces Nice solid unit riser have some rust and few broken carriage bolts The risers were advertised...

I will be getting rid of some of my seats only need one pair for my project and will most likely be keeping the 66/67 seats I have posted. I will sell these, the 6/69 ones listed and later will list 69 set that has been recently re-upholstered See picture for condition can drop off at...

I have post trying to see if I could put backs etc on my project. I currently have nice set of 69 seats that I plan on using so I am selling off seats I will not be using. It kills me to sell these as they are my favorite style. If I had time and patience I would try to put 69 upholstery on...

Used bucket seat cores with back panel. Have enough seat for my project decent cores - NO TRACKS Good deal for someone that can pick up have 2 boxes can ship. More pictures can be provided $300 for the pair as pictured. Drive to northern twin cities every week-end (Minnesota)