Search results for query: *

Looking at upgrading my wheels and tires on my Duster and going with 18" wheels. I'm not too worried about finding some that will work on the back, but not quite sure what will work on the front. Right now I have 205/60-15s on 15x7 wheels with 3.75" backspacing. What kind of backspacing would...

I'm swapping a 4 speed into my Duster and am also looking at changing out my cheap ground scraping headers for a better fitting set. I'll have all the stock 4 speed stuff including the bellhousing and clutch linkage, ect. How do the TTi headers fit with a 4 speed? Anything I'll have to modify...

I am in the process of swapping a 4 speed into my Duster and am in need of a bolt in handle style shifter mechanism and a good set of shifter rods. If you have anything send me a PM.

I am swapping a 4 speed into my Duster and came accross a B-body pistol grip shifter handle. What else am I going to need to put it in my car? Right now it has the stock shifter, and I need a set of shifter rods too since mine where bent into circles. The stick doesn't fit into the stock...

Looking for a set of bucket seat tracks for my 71 Duster. Anyone have any? If so send me a PM.

I plan on putting the 340 from my Duster into my 67 Barracuda, and am wanting to put a manual trans in there instead of an auto. From the dyno, I calculated the engine made about 330 hp. Would an aluminum case over drive 833 hold up behind this or should I look for a standard 4 speed? A 5...

I'm looking for a set of bucket seats for my 67 Barracuda, converting from a bench seat. I found a set of bucket seats from a 66 Barracuda. I know the body styles are different and the tracks aren't the same for the two years. But are the seats and seat frames the same? They'd have to be redone...

I want to replace the front bench seat in my B'Cuda with some bucket seats, but I want to use the correct 67 seat foam and covers. What cars and years can I get seats from that are able to interchange the foam and covers with the Barracuda stuff? Looking at the Legendary Auto catalog, it looks...

Anyone with notchback Barracudas post some pics. I have a 67 Notchback and will be restoring/ modifying it here soon. It's originally a 273 2 bbl, auto, but will be getting a 440 I'll be rebuilding. I hope to get the body work done next spring then after that I'll work on the engine and get...

I have an old set of Ansen Sprint small bolt pattern wheels that I want to put on my 67 Barracuda. All of the lug nuts I have are right handed and the Barracuda has left hand lug nuts. I've done some looking online and I can't find what I need. Summit Racing has some that are similar, but...

Repaired the cracks, painted and installed the sharktooth grille I bought off ebay. Here are some pics. Before After

I need a pair of turn signals for my 71 Duster sharktooth grille. They are the kind that twist in. The ones on my normal grille were connected with 2 screws. Anyone have any they'd sell? Here are two pics of what I need.

I got a sharktooth grille to replace the standard grille in my Duster and have a couple quick questions. What is the proper color for a 71 Duster sharktooth grille and where can I buy the paint? On my standard grille, I used Mopar argent silver wheel paint. The grille has a couple of small...

I need a new set of cat whiskers or the weather stripping that goes in the top part of the door for the windows. Browsing Paddock Parts, it looks like there are two different kinds? Is there any difference and if so which ones should I get...

Got my panel in this week and cut the holes and installed the gauges. The gauges are Autometer Phantoms. I also have two lights for the turn signals and one for the high beams to install. And I'll have to figure out something for the lights and wipes yet. I plan on making a new wiring...

I'm looking on cleaning up my engine bay, and making it look nicer. Any ideas on things I should do? I'm not looking to make it all shiney with chrome or anything. I like the black wrinkle, machined look. I'm thinking of removing the heater hoses , and getting some plug wire looms and new...

Anyone ever used these sway bars from ebay? If so are they good, and do they offer any improvement? http://cgi.ebay.com/ebaymotors/NEW-Dodge-Dart-duster-sway-bars-front-rear-73-76_W0QQitemZ130225645673QQcmdZViewItem?hash=item130225645673& They are pretty cheap, about the same as a name...

Went with some other Mopar guys and dyno'd our cars on a Mustang Dyno. I put down 220 hp and 232 lb-ft which calculates out to 340 hp and 357 lb-ft at the engine. That's without tuning in the carb and the timing, which I know the timing can be optimized and they also said my converter is...

I'm looking into putting an aftermarket sway bar onto my 71 Duster. Are most aftermarket kits bolt on items? Or do I need sway bar tabs on my lower control arms? And if I have a 73+ k-frame (which I used to get the bbp) would I use a 73-76 sway bar or do I still use a 70-72 sway bar?

I was just looking at Summit's site and was wondering if I'd see any improvement in switching out to an MSD, Mallory, or similar ignition system over my stock electronic igniton. Right now I just have a cheap napa electronic box and distributer, stock coil, and 7.5 mm wires.

I know Rocky Mountain Dashes makes custom gauge bezels, but are there any other places that make them? I want to put a full set of Autometer Phantom gagues in my car and am looking for a bezel.

I was wondering if it will fit under a flat Duster hood? I have a Torker 340 now and I believe the Air Gap is taller. I also have a Mopar air cleaner. Will it fit or will I have to get a drop base air cleaner bottom?

Looking at the Mopar SS springs to raise the rear of the car for more tire clearance. Looking at Summit's catalog they have the 002/003 original 1968 Hemi SS springs or the 865/866 3300 lbs springs. I was wondering which ones would be the best choice. The car is a 71 Duster 340/727/8-1/4 that...

Looking for an affordable race helmet and came accross this one. http://www.soloracer.com/pyroopenfacesa.html Just wondering if they are any good. Or if someone else has an alternative that's not too expensive. I'm going to take my car to the track in about a month and I thought I should...

Right now I have a Torker 340 that I got for almost nothing but I hear alot of people calling it junk. I've been thinking about getting one of the Edelbrock dual planes such as an Air Gap/RPM/LD340. I know I'd gain a lot on the low end over the Torker and they should all be able to pull up...

Are they really that rare? I've been looking for one for a few months now that will fit my 71 Duster but haven't had much luck. I've seen a few listed on ebay but the people want outragous amounts on money for them and they never sell. I've also looked in the classifieds on other mopar sites...

I got a set of scoops and I need the measurements to place the scoops and for the holes in the hood. Thanks for the help.

Looking at either the dual a-body hood scoops or the single scoop that came on the Demons. Where is the best place to buy them from?

Putting in the 4.10s this weekend to replace the 3.21s. I was looking at the chart to see which speedometer gear I needed and it lists tire sizes for 26" and 28". My tires are 295-50r-15s and are listed at 26.7 inches tall. What gear would I need then? The one for 4.10s and 26" tall...

I'm open to ideas on what I should do. I have an 8-1/4 attached to the stock /6 rear suspension. My car has a 340 with approximatly 350hp. Followed the Mopar Muscle magazine 400hp xe268 build up. The car is an auto with a TA tight 10" and has 4.10 gears and sure-grip. I think I have 318...