Search results for query: *

Stroker/cubic inch eats up cam duration like it's going out of style, so get a bigger cam like 288*+duration and .560 or so lift with like around 106-108cl Heads not the limiting factor[completely that is]

I would be happy with 260cfm on the intake while the exhaust is cake to get 180-200. Shady dell sells j heads in the 265cfm range right now If someone wanted them, and they don't tube the push rod holes.

One guy says he can hear the difference 'sound wise on the bench', another says the difference is 5-6cfm, must be because the 340-360 heads have a deeper pocket=taller short turn then the chevro therfore more of the flow coming off the turn has to pass over the tapper/transition, which doesn't...

With meats go 4.30 gears at least.

Hughes engines use chevy valves...........

MP 847 spring will work for you, it's a single w/dampener.

002-003 ss springs

If it shims up the spring to stiffen it, sure, but how much is a new spring?

This good stuff that everyone should get in on.

Explain how a nail head valve with an undercut stem creates more turbulence? Explain how if that turbulence is coming off the valve and into the chamber how that turbulence is harmful and not just mixing more.

I know about the tulip/semi tulip valves and there reasoning behind using them and all the low lift flow .150-.400. Doesn't sell me. The valves I have are 1 piece, made in argentina....wait...guess what? mopar valves are made there too, did you know that? Ever buy big valves for a set of RT's @...

Where? fontana? pomona? bakersfield?

Ground the n saftey terminal on the starter switch, if it starts then buy a new n safety switch unscrew the old from the trans and install the new one. If buy grounding the switch terminal it doesn't start, you need to look at the ignition switch it's self [where the key go's] or it's wiring...

I agree, Unless his heads are worn out and he's going with bigger valves, then the chevy set up is just as cheap or cheaper, you could reuse exhaust valves but........why? Guides cost the same and would require k liners unless knurling them. The set of .100 long 11/32 2.02-1.60 cost me $140.00...

bump:toothy10:

I like the addition of the cuff's. lol Yeah and the nos=nitrous oxide systems & the case is counterfeit restoration parts= new old stock... wow 20+yrs investigating auto parts counterfeiting? It sucks to see reproduction parts dry up but 9yrs of being too lazy to become authorized is...

Some needs to explain why they are being arrested in the picture, I wonder if it has to do with there fading carpet kits. lol

657 would have jam nut axles, it's also 18 spline axles. In neutral both tire should move the same if suregrip.

I used to have a 74 4 door 318 AT I got for $500 when I was younger and man did I tear around town in that thing, it would run neck and neck with a friends malibu w/warmed up 350. I wrecked it drove it wrecked it again and finally traded it for a 69 swinger with a wore out slant. What a great...

You let one in next thing you know some dumb ace brings his pit or rottie and people get hurt or dead, so thats simple. Wallmart has killer deals on mopar atf4 and other oils, thats the only reason I would go there.

communist lib's suck.

So what's your ultimate worry/concern at this point?

Using .100+chevy valves is the way and if they install seats on both int/exh they will have the valves sitting high on the seats -good for wedge heads- and will get the valve stem height like stock= 1.920 =no geometry issues. If you use the chevy valve springs they'll probably just cut the...

It would be nice to see the calipers but looks like new style brakes.

There are a lot of different opinions on 2.02 vs 2.05 intake I think the 2.02 will be good, I believe the 2.05 negatively affects low lift flow just a little but helps the higher lift flow. I like the idea of the amc 1.65 exhaust valve being that it creates more short turn to work with. I don't...

Chevy's do that well.

The rubber insulated kind.

FORD=for old retarded dudes. CADILLAC= Crack Addicted Deranged Ignorant Looser Lame *** Crap

I liked the Bavarian manure waggin.lol

holy friggin crap ...bwhaaa ....total loser.