Suregrip391
Well-Known Member
Not the best of pics but...I was told 73-76 A-body, large bolt pattern but they just dont look right,I could be wrong??....
Can you ID these brakes?
- Thread starter Suregrip391
- Start date
-
Suregrip391
Well-Known Member
Another picture of brakes
Suregrip391
Well-Known Member
One more.....????
TheCrackHead
Banned
It would be nice to see the calipers but looks like new style brakes.
swing69
fightin' socialism
Thats exactly what they look like. The bolt through LBJs are A body, and the rotors look to be the 10.87" diam. OEM rotors. Looks like plenty of meat on them to cut them as well. MIN. Thickness. .940" after final machining.
Suregrip391
Well-Known Member
Sorry, he did not send me any pictures of the calipers..Just what you see here. The seller also told me that these rotors and calipers were only 8 months old, taken off a show car and replaced with an aftermarket setup....*Yikes* Looks a bit older then that to me..... :angry7:
They are BBP.
They look like A bodies to me. The FMJ knuckles look similar and are slightly taller. The upper control arms look like A's too. Only real way to tell is to get some measurements.
The spindles will likely work on an A, or your B.
They look like A bodies to me. The FMJ knuckles look similar and are slightly taller. The upper control arms look like A's too. Only real way to tell is to get some measurements.
The spindles will likely work on an A, or your B.
Suregrip391
Well-Known Member
Thank you guys, I appreciate your replies...
-
