Search results for query: *

67 Plymouth valiant dedicated drag car selling as a roller with new interior and new cage with dual swing out door bats dana60 with ladder bar suspension-car has new everything redone from front to back with full Qa1 front torsion bar suspension,new wiring,new dash and gauges 2014 28ft...

I have read thru the small block oiling mods so many times ive made my brain dizzy-ok i have a 72 360 L.A. Block with bushed lifter bores and have problems with not enough oil getting to the rods and mains, we oil the rockers and springs with spray bars so the main oil to the heads is blocked...

Ok so i ordered new gaskets for the adapter, i know what the big gasket is for and the steel fiber gasket is for under the head of the pass thru bolt but what is the big thick cork gasket for????? Thanks steve

So were in our final stages of wiring the drag car and got a question-we run a pos. Cable from battery up to starter-the momentary switch on the dash is 30amp-do i still need a relay.since were going from the switch to the neutral safety on the shifter down to the starter. Thanks Steve

Just got a new aero scoop for the valiant, 2 questions-1 what grit sand paper did u use to prep it for paint and 2-did u drill the 1in holes in the back like they want or leave it solid?? Thanks Steve

Anyone download a app for there phone??? I just goggled them and we now have a few choices and wondering if anyone had history on any of them, looks like no more writing everything on paper . Thanks Steve

So i called pro glass today about a lexan windsheild for the 67 valiant and they told me they didnt have a application for me??? I then asked if they ever did a 67 cuda and she said oh yes plenty------ isn't the 67 cuda (abody) the same exact windsheild that the 67 valiant would use???? Or am i...

Does anyone know if there is a spec on how high or low the dash cross bar has to be placed and if u have a pic of yours in a abody i would appreciate it thanks Steve

Anyone know when they put the book out for sale???? Lots of changes going on from what i hear, called them today and they couldn't even answer me when the book will be out-lol and talked to two different techs and got 2 different answers on my roll cage question-how the hell are we supposed to...

So been awhile since i posted in this section, so those of you having your transplants done what did u settle for on total timing? ?? I've done some reading and doesn't seem they need as much as first thought what did u guys find out?? Thanks steve

SO I need new headers for the little ol 360 in our valiant,Doesn't look like I have many choices other than the TTi 1-7/8 chassis headers SO-Full track car-No street-whats your opinion on paying the extra $200 for the coated headers or do I just get the plain steel and paint the outside with a...

Ok it's not that I would do this but is it legal???????? Can u according to NHRA rules for Pro class-turn headers around and run them straight thru the hood????? I can find nothing that it would be illegal to do????? All i can find is that they have to be directed away from the driver,Well if...

I did a search and didn't find anything,I have a 5.7 block with a block number of :53021319C8---I don't see anyother markings on the block to tell me what it came from does anyone know or have a site i can find that info???? Thanks Steve

OK-Seems there is a "difference" of opinion on this subject so I want to go to you racers on this question----- Do you plumb the rear brakes into the master cylinder port closest to the fire wall??????? I have searched and found LOTS of different answers and I want it straight from a racer. We...

I want in a bad way to put a rack on our 67 valiant and get rid of the mopar box but dont know where to start, car has qa1 kframe in it and was wondering how to do it-steve

I have this rocking small block for sale over in Moper Mechanical parts for sale-Thanks Steve

We have a Ray barton built 360 small block for sale out of our 67 Valiant drag car,Motor dynoed at 590 hp,We ran it this season and in a 3000# car consistently ran 10.5 and dipped to 10.4 a couple times,Here is what I know about motor,It was built for Jason Reese a Member here in 2007,The engine...

We just got a letter Friday that they want to do a audit from the state of Wisconsin and we are kind of freaking out,We run a very small H.V.A.C. business and pay all the necessary taxes that goes along with it BUT for some reason they want to audit us???? Any suggestions Thanks Steve

Geez almost 30 months here in Wis. And still no 22 ammo on the shelves, i call bullshit that the government has nothing to do with this, also anyone notice that lots of 223/556 mostly now are available in 200 or 500 count ???? Instead of 1000 or 2000 bulk amounts -steve

I thought it would be enlighting to list the stupid stuff that happens to us racers just out of the blue when were all pumped up ready to go racing; ::; I'll start: Just filled the cooler with ice and walked out to hook up the trailer and go meet my son at the track and went in to check the...

It will my first time adjusting ladder bars and have been studying Dave Morgans book but not understanding completely,With the new trany we need to take some hit out cause Zach's pulling the wheels 6ft in the air sure it looks cool and he gets off on it but it's not helping so I have to take...

So been a week or two,Got the trany back all refreshed,New alum front drum,New alum servo's,new red bands,new clutches,Torrington bearings through out,New a& a transbrake valve body,Out put shaft was bent so that is replaced,New roller back support,Ultra sprague and new front steel planetary...

I know welcome to the crowd with valve cover leaks but I welcome any helps,I tried buying the moroso rubber gaskets sandwiched with steel inserts but we still get leaks on the lower corners(firewall side),Covers are fabricated aluminum,So any suggestions would help,Should we go back to cork...

Does a vibrating needle on a cowl mounted fuel pressure gauge mean anything??? 30 motor,Holley black pump brand new,Brand new big port Magnafuel regulator, car is dedicated drag car so 1/4 mile at a time,under w.o.t. my son said the needle goes between 6 and 8 vibrating back and forth,idle...

Just got a email--Registration is OPEN--See all you there--Steve

Anyone else here this??? I was working with josh king on a 6.1 block for our drag-pac motor I want to put together and the price was out of the world. He informed me that Mopar no longer is casting blocks and the prices are going sky high, I dont know if its only the 6.1 or what the hell is...

Hellcat-lol

Ok-We have 45 runs on the valiant since we put in a tranz act valve body,Last night we were in the 5th round and the trans brake didn't hold at the light,SO we pitted came back checked fluid level-it was good,Checked the switch -power going to the post on the trany-11.25 volts,Checked the post...

July 27th at great lakes dragway -all mopar event-car show and racing-last year sucked in a big way lets make this bigger than its ever been, they already cut it back to one day lets not see it end -Steve a.k.a swifter

here is a pic of zach launching