Search results for query: *

Made by Kelsey Hayes in the 70s and sold thru the Direct Connection performace parts catalog over the dealership parts counter. These are pretty rare and don't come up for sale too often. this one is in pretty nice shape with the label on the knob intact. $75 shipped within the US/Puerto Rico/US...

OEM Super Six 2bbl intake manifold, this is the much more scarce aluminum version. Good condition. Previous owner welded up the seam to avoid the porosity issues. $225 plus shipping

I have a pair of fenders to fit Duster, Valiant, or Scamp. They have the latch support tabs for 73-later, but these both came off a 72 Scamp. They will fit 70-71, but the marker lights are different. They both have some cancer in the lower rocker area, as you can see in the pics. They will need...

I have a trunk lid removed from a 1972 340 Duster. Has the cutouts for the Go-Wing, but was not drilled for it. Will fit any Duster, Demon, or Dart Sport from 70-76. Has a few dents here and there, but no rust. I tried my best to show everything in the pics. Good for a daily, or to do a little...

I have a pair of complete doors off a 1972 Scamp. They are nice and solid, skins are nice with no rust, bottom seam looks pretty good. Driver's side has a light crease right above the factory crease line. Passenger side has a tiny ding right below the vent window and 2 dings toward the...

Nice trunk lid for 70-up Dart, Valiant, and Scamp. No rust, no dents. Chrome strip moulding has a couple dents, but lip is good and straight. First $60 takes it. Located in Wilkes-Barre, PA. I'd prefer local pickup, I'd have no idea how to pack these for shipping. If you need them shipped...

A-body K-frame pulled from V8 1970 Duster. Good shape, no cracks. First $100 bucks takes it. Located in Wilkes-Barre, PA. I'll ship if I have to, but I'd prefer local pickup

15x7 cop car wheels, I have 8 available. $200 for a set of 4, $350 for all 8. Located in Wilkes-Barre, PA. I'll ship if I have to, but I'd prefer local pickup.

OEM Super Six 2bbl intake manifold, this is the much more scarce aluminum version. Good condition, no cracks or issues. Removed from running 225. First $200 gets it. I can ship anywhere.

Sharktooth grill pulled from '71 Duster 340, good driver quality, a few minor issues but better than most. No missing teeth. Comes with headlight bezels. This is the much more scarce black plastic, not the gray. Located in Wilkes-Barre, PA. I'll ship if I have to, but I'd prefer local pickup...

Anybody need a set of Slant 6 headers? If you have been looking for these, you know finding a set of used ones is about as rare as hen's teeth, and they're brutally expensive new. Summit sells the Hooker ones for over $500. These are in good shape, one weld around collector has been rewelded...

I've been told these are not Cal Custom, but rather they are Ansens. Nice shape, no cracks, no busted fins, a little ground notch at each of the 4 top lip areas to clear the intake as seen in pic. Pretty clean, ready to mount, or good for a nice full polish. $125 plus the ride, or I can meet up...

Okay, here's the deal - I have a 360 and 727 from a 1985 Dodge 1-ton van. Ran super-strong, and had top end rebuild with freshened heads and valve job. Pulled last year from a van that had an interior fire (not engine-related) and has been in my garage since then. It has a good 727 as well. I...

...and here's what's sitting in one bay of my mechanic's garage - the Carpinet Bros. B029 Hemi Cuda! Pretty freaking neat to get to poke around one of these holy grails in person and see all the neat little factory tricks. It was in for a valve job and general freshening, he said the owner is...

Title pretty much says it all - I'm looking for a set of four BBP rallyes, 15 x 6.5. I don't need them mint, I don't need 'em nice and painted, and I don't need the caps or rings. A bit rusty and scratched up is a-ok with me. I can buy 'em outright, or swap some parts with you. I have three 14x6...

I got a new set of Moroso solid engine mounts that I ended up never using. Paid $45 plus shipping, I'd like to get $35, and I'll ship 'em free in the US.

This might be a dumb question, but that won't stop me from asking it! I have a '67 Barracuda, and the leafs on the back are totally shot. I'd really like a pair of XHD ones, since I like the "stinkbug stance" of the 70s! Aside from going out and buying new springs, has anyone here ever used a...

I bought an A-body 4-point rollcage for my 67 Barracuda but decided to go a different route (tamer engine, etc.) so no need for the cage now. I'd like to get $100 for it. I'd swap for a pair of HD leaf springs. Sorry, no shipping. Pickup in Shickshinny, PA. Check on Google Maps to see where I am.

Title pretty much says it all. V8 K-frame, complete with original grime. A little elbow grease and it'll be good to go. Came off a 70 Duster. Sorry, no pic, but you know what they look like. Pick up only, will not ship. I am in Wilkes-Barre PA right off I-81. First $100 takes it. Thanks!

Title pretty much says it all. New in box, gasket was ripped so I chucked it. Summit doesn't have any of these, Jeg's sells them for $42.99. I'd like to get 20 plus shipping.

I know, it sounds like I'm ***-backwards. Thing is, my boss has a 95 Dodge van with a bad A500. He's had the trans replaced 4 times, and with 180k miles, he's tired of it and bought a new work van. So, he basically offered up this van to me for nothing. Now, I have an A904 out of my old 84 van...

I'm helping a friend clean out the remains of his dad's collection from his old speed shop that closed in the early 80s. Among the piles of headers hanging from the rafters were these here, NOS Doug Thorleys, the last two Mopar ones. Unfortunately, there were no labels or tags on them, so I'm...

I have a Slant in my 80 Dodge van. It has been running fairly poorly since I bought it (the price was right), it seemed like the engine was missing on one cylinder. So, I did the ol' pull-one-plug-wire-at-a-time thing, and it turns out both #3 and #4 are sounding dead. The plugs are all firing...

I decided to part out my beloved 77 Camper Van. I really wish I didn't have to, but with many years of camping, touring with bands, and towing, 2 engines, 3 transmissions, over a half MILLION miles, and some rust starting underneath, it's time to say goodbye. Now, just the van body and frame has...

Wondering if anyone here remembers the Sayonara Barracuda funny? I can only find one picture of it. If anyone has any others I'd love to see 'em!

Anyone got a 360 flywheel they don't need? I can buy, or swap you a 340 flywheel. Also still looking for a 360 oil pan.

I'm looking for an Offenhauser (or Cain, Lynx, or any other brand) dual 1bbl intake for a Slant 6, part number 5041, and an Offenhauser aluminum valve cover for a Slant 6, part number 5284. Honestly, the more beat-up, the easier it would be for me to afford it! I'll consider a cracked/broken...

Ok, so I found this guy who has what seems like a really nice 70 Valiant for sale in Philadelphia. I was going to buy it, but frankly, I don't have the money, but I felt it was way too good of a deal to just pass up and not tell anyone about it, so I figure I'd give a heads up on here. Here's...

So, I have heard of a few guys doing this in the old days, using 340 pistons in a 360, I think they called it the Hoover engine. Anyway, I have a nice set of 340 standard-bore pistons laying around (I think, more on that in the second question), and a 360 that's itching for 'em. I was going to...

Anyone got a 360 oil pan, preferably an extra-capacity? I don't mind doing a little welding work to one that's been damaged.