Search results for query: *

I believe the magnum uses a 143 tooth flywheel. I purchased a flywheel from Brewers for my 5.9. You may be able to use a crank trigger on the front of the engine. I'm going to use a Megasquirt on mine.

I believe the 360 2bbl intake will have bigger ports than the heads, but I could be wrong about that.

On my Dart, the horn is located under the battery tray. The wire color is usually dark green.

I bought an aftermarket damper for my magnum in my Dart. I'm using all of my 318 pulleys on my engine. The bolt pattern is the same.

Hi, I bought a short block from Mabco on eBay. I wasn't expecting a high performance short block. It came as described with a stock roller cam. My son and I have installed ported R/T heads and the 380hp roller cam along with FAST EFI 2. I think the engine is running great. It's funny that I have...

I have an EZ-EFI2 on my Dart. The only problem I have had with my system is the MAP sensor went bad after three months. Was a pain to change and put the throttle body back together. I bought this system because I'm an info junky. I can see everything this system is doing on one screen. For me it...

Hi, you will need an intake manifold, carb, and LA ignition system. What kind of car is this going in?

I put the 2.02 versions on my Dart and they work very well.

I had the same problem with the 360 Magnum I installed in my 74. It would start and the shoot a big flame threw the carb. Tried everything. Checked firing order, checked for spark, and even checked if the distributor was aligned correctly. I had a bought a used Edelbrock 750 for the engine. When...

I didn't know that the one piece gasket didn't work on a non magnum oil pan. The pan is now sealed. Nothing that RTV didn't fix. It was a pain in the a## to get the oil pan removed with the TTI's installed. I had to remove the collectors and remove the header bolts to allow the headers to move...

Hi, Just got my 360 Magnum in my Dart running today!!!:D Found a small water leak coming from around one of my freeze plugs.:banghead: It's very small, should I put some aluminum sealer into the cooling system, or bite the bullet and change the plug. The engine is from Mabbco motors. They...

Hi, I've never ported heads either. I thought I'd try to do some work on some Magnum R/T heads I found not to long ago. I'm sure I can go further, but I don't want to screw them up! LOL

Hi everyone, I recently found some R/T heads with the 2.02's. I've heard that the castings from Mother Mopar were ruff, but look at the intake ports under the valve. One head has more casting flash than the other. I'm going to clean them up a little before installing them on my little 318. Does...