Search results for query: *

Pump gas with 10% ethanol will eat aluminum.

I thought meth eats aluminum?

Bingo 1966 1967 Mopar Stainless Steel Gas Fuel Tank | eBay

I have seen stainless steel OEM style tanks for B-bodies, maybe that company has A-body tanks in development.

Play with the acc pump nozzles after the door and timing are figured out.

Square up the slot and locktite the screw. Adjust timing and mixture to get good idle. If you raise the timing you will get pinging. Have the dist advance modified to limit full timing to 34 btdc.-OR- you can also use an adjustable vacumn advance diaphram. Square the slot, adjust timing max to...

Simple fix. Just use 102 octane leaded race fuel like the car was designed for. Only about $14.00 a gallon.

Also, drill straight!

If you still have caveman droplights with caveman bulbs, keep them far away and unplugged. Ask me why!

Even with the floats set correct and the needle and seat verified good, I have found that too high an idle setting can cause this drip. I am not talking idle RPM, but primary blade settings to far open, past the idle circuit hole. This allows increased flow past the nozzles, pulling fuel out...

How can the FAST system be self tuning with O2 sensors when using E85 or E98? I did not think O2 sensors worked with alcohol.

Any info on a full feedback EFI system for use with E85 fuel?

The beauty of factory TBI is it will tell you whats wrong. Get it scanned.

How long would you have to let it sit for the ethanol to separate, the octane increase above 100 and lead levels to return to 1950's levels? LOL

http://www.holley.com/types/Carburetor,%20Power%20Steering,%20Fuel%20Pumps,%20Fuel%20Injection.asp

If you have not purchased the carbs yet, you may want to go with 390 CFM.

If it can accept E98 and is self tuning, how do O2 sensors act with alcohol ?

You may have to set the primary blades correctly and adjust idle speed with the secondaries

Make sure the vacumn advance is working.