Search results for query: *

I am looking for a set of 15x7 steel wheels for the front of my 73 Duster, to be used with 225/70/15 tires AND two 15x8 steel wheels for the rear. Big bolt patter 5 x 4.5 required. I am open to any condition, but pics would be great. I am located in Ventura County, here in California, so...

Thank you for the lead. I will keep it in mind if I can get the rear itself bought.

Looking for an A Body 8.25 (8 1/4) rear, complete from drum to drum. Ideally 2.76-3.21 gear ratio. Would be interested in driveshaft as well if already compatible length wise with the 8.25 rear. Most likely, I will buy BBP 14x7 rallye wheels to work with bolt pattern of an 8.25 rear. I am...

Any leads?

Looking for a stock, black steering wheel for a 1973 Duster. Needs to be in decent shape and shaft splines in good condition. Needs to be complete. private message with any leads.

Looking for the long narrow seal that bolts on to front underside of the stock hood, providing an air seal with the top of the radiator and the radiator support. Any leads would be great. Message me with any leads. I am located in Southern California. As a side note, I am also looking for...

Looking for a dual snorkel scoop, preferably painted (but not critical) for my 73 Duster. Would like it to have mounting studs included and stud holes in good shape. I am located in Camarillo, Ca, about 60 miles north of LA. PM me or post with leads (not vendor leads).

Looking for a complete A-body, drum to drum, 8 ¼ rear, in good working order. Can be 2.76-3.21 geared, open or sure grip. Also would take interest in a small bolt pattern A body 8 ¾, with 2.76-3.23 gears, open or sure grip. Located in Southern California. PM me or respond with leads. Thanks!

Looking for an A-body, complete drum to drum, 8.25 (8 1/4) rear in good operating condition. Gearing can be anywhere from 2.76, 2.94, or 3.21. Will be going into a 72 Scamp. Please PM me with any leads. Thanks. -Justin

I do have power steering.

Does anyone have the pulley and bracket setup for a non AC 318? I have a 73 318 that was origianally air conditioned and I am need of the proper crank pulley, water pump pulley, and any other bracketry needed on a non ac setup.

Would this be on the Carter or Holley? What would this do?

I am looking for a good running non emissions 2bbl carb for a super six intake on a slant 6. I have a 318 unit on it now, but I think it is too rich and killing my fuel economy, plus I dont know where to find jets.

I know its not a 3.23, but I have a good and solid 2.76 geared unit out of a 73 Duster with the large bolt pattern. Let me know if you would like to buy it.I am here in SoCal.

I am in need of a small block kickdown rod (from carb to main linkage that goes to trans only) for a 69 340 in my Barracuda. I used the one that was previously on it for my 4 bbl swap in my 75 Dart, leaving me with nothing for the Formula S. If it matters, the trans is a 727, the intake is...

I am very interested. Reply to my PM. Justin

Is this easy to mount on a stock regular 73 hood?

I am looking for a bolt on six pack or twin snorkel hood that can utilize on my 73 Duster. I would like the twin snorkel setup, as I am chasing the Duster 340 look. I am in Southern California. Any help is appreciated.

Does anyone else have a complete from drum to drum, functioning 8 1/4 setup here in California, preferrably southern california that they would like to sell or get rid of? It needs to fit a 73 Duster. I have the large bolt pattern, but also have unilug cragars, so maybe they would still work...

I am looking for a Themoquad that would be acceptable to use on my 318 with performer intake. It needs to be in good running condition, nice looking and somewhat well tuned.

I am in need for a front bench seat that will fit in a 1976 Valiant with a 4 speed. A few minor rips are acceptable, as long as it is still comfortable to sit in. I live here in southern California, so I can pick it up if one is available.

I am in need of a complete 8 1/4 rear, with brake assembly, axles, studs, preferably large bolt pattern, as it would be for a 73 Duster. It can be 3.21 or 3.55 ratio, non sure grip or with sure grip. Im having a hard time finding exactly what I need. Im in California. Please let me know if there...

Check out the one im selling on ebay. It has the longer snorkel on the drivers side and the shorter on the passenger. It has oval openings. Period correct for a early to mid 70's small or big block. This one came off a 400, but is the same used for small blocks. Worked great on my 318. Painted...

I am in need of a fully functional instrument cluster for my 76 Valiant w/ 4 speed and slant six. I would prefer the 100 mph speedometer if available. If the temp and fuel gauges work, that is optimal. I could care less about the worthless ammeter. I need the speedometer to work, even if its off...

I am in Southern California and in need of a complete, running without knocks or misfires, 318. It can be bone stock, but a solid motor with a warmer cam or any other modifications would be considered. It will be in front of a near stock converter and higher gearing. I don't want to hassle with...

I on the hunt for a 1989 to 1997 Magnum engine series starter, whether it be a V-6 or V-8 unit. The junkyards are scarce around here and the parts house want $80 plus with the core. I want to use it in my 73 Duster with a 318. Let me know if possible. I can pick it up if its here in Southern...

I am looking for a dual snorkel air cleaner from either a small block or a big block for my 318 with an Edelbrock carb. I want the 70 and up style, not the bulkier versions from the 60's. Show pics if available. -Justin