Search results for query: *

I'm crying right now and my stomach hurts. I would remove the light bar and replace your rear view mirror with it facing inwards.

Watch the new Mad Max film. Lots of ideas how to mount lights. Thats not one of them though.

Regardless of what the original poster thought of your reply, I myself, conjured up a picture in my head that made me belly laugh out loud.

The two choices are either dumb or cool. Stupid isn't one of the choices.

The next time your car won't start try this. With the car in park get out and rock the car forward and backward. If the car starts then your transmission linkage may be the culpret. Especially if you have replaced the neutral safety switch. I know this sounds dumb but does the car start always...

For a daily driver I would go with the MSD billet ready to run distributor with a matching MSD coil. The distributor has provisions for both vacuum and mechanical advance.

Good one. I don't see how I missed that. Well..actually I do. I don't remember much of the 70's. Sorry for the misinformation.

A ready to run distributor for the 273/318/340/360 will fix you right up. They can be found for around $70 and are a complete drop in replacement for your old distributor. You can leave the ballast in place and you don't have to re-wire anything.The electronics are built in. It really woke up my...

Red to positive side of coil and black to negative side of coil. You might have to cut off the connecter and solder new spade connectors to connect to the coil. Use heat shrink for that factory look. Everything else stays the same. Including the hot lead to the positive side of the coil. Ballast...