Search results for query: *

looking for the clip for the ball and socket for the kick down linkage

It didn’t work out. Your inbox is full. If you’re still interested let me know.

looking for this if anyone has one laying around they want to get rid of. I can get one from amd but I thought I’d stop by here first.

I’ve got a rocker lined up. If it doesn’t work out I’ll message you. Thanks for the offer

Will do thank you.

I need this. A piece of rocker panel To fix spots under the driver and passenger side at the corner of the door. 6” per side should cover it. So a 15” long Piece to be safe. And the lower part of the quarter panel in front of the wheel well. I think even a 4 door would have this as the rust...

Yeah. That looks right al. Those are the long ones Your a life saver man.

looking for the parking pawl return spring in the tail shaft housing Two original pan bolts One filter bolt to the valve body, one of the three longer bolts. If anyone has these laying around let me know 727 probably shares the same parts

looking for the ring gear assembly that fits a 4/4 904. 76 was the first year they had this set up. The gear is 4.5 as opposed to the later 5”. The difference in the earlier ones and this one are the teeth on this one are taller to account for the extra disc. - You can see here the...

looking for a good used one for a reasonable price that’s in perf3ct or very close to perfect shape 4 bolt with little to now wear and no dug in sealing ring marks.

They are getting painted and then ported today. Didn’t figure I’d go that far with it but for $9 in dreamed tools and several threads on it. Why not. 318willrun did a build like this and did beat that 340 duster he was after for less than $500 in the entire engine build. I’m doing the same thing.

Lol.....that’s definitely a loose engine......almost as loose as it gets Yeah I have some hedman shortys I got for $50. I’ll see what I can do on that. I might have to wait but it would be worth it. If someone comes up with something for like $20-50 that would be awesome but unexpected...

Don’t you thirst 2.3 cam would work...if I put two of them in it might be fine. And....is that 272 realistically too much cam for this engine....If so I’ll see what I can do about going smaller if I can swing that or wait it out to see what anyone has. Lol.....at this point I could even mate...

That’s really sad that he died. People leave so much behind and so much left undone ....and their family misses them a lot. Not a fan of that

I’m curious about that and was gonna ask. The 262 cam has a 218/224 @50 This 272 is 216@50 Lol......I love the signature at the bottom of your posts...216@50 is for sisssies. Lol Im screwed! I know they measure them based on @50 more than advertised. Does that mean that the 272 is actually...

I didn’t see that 1789 cam.... That’s a good price on that. Wouldn’t that cause some matching issues with compression and gearing?

Alol the summit cams are too big. The k50052 is the closest at 272. They recently taised the price of this of for some reason. The other two are the k9600 and the k9602 and they are way too big. I’d like a 262 or something that will go with the ridiculously low compression. And the highway...

I have a pretty worn engine I’m putting some life back into with new bearings and baskets. A new timing chain and oil pump. It’s a 318 and has the stock 240 cam. The cam I have is good but I’m putting a feeler out there in case someone has a cam they want to sell cheap or just get rid of...

Thank you for that. So far I have everything to get this done except the kick down rod for the 4 barrel. So far it's been pretty hard to find

Not going to use the 2 barrel linkage Want an adjustable 4 barrel linkage

The kick down for the 2 barrel is shorter and straight A bend and an extension piece would have to be made. The 8004 by edelbrock could be used. I can't even find my 2 barrel rod.. I am still looking for a 4 barrel slider linkage.

All I need now is a kick down rod that goes from the bell crank to the csrburetor I saw an extension piece Edelbrock 8003 and 8004 Those are too small I think it needs to be 3/8 fine thread So far I haven't been able to find one. I'm thinking maybe take it to a machine shop and having it...

looking to put the linkage back together . throttle bracket for a 4 barrel slider piece for the 4 barrel. throttle linkage to carb attachment. Holley 20-7 bracket for the 4160

it was NOT rt specialties...but i would like to know who it was...i still need one...and the button

WANTED >>>looking for the cable that goes into the shifter pipe and shifter button for an automatic console shifter new or used

i can see why, those are beautiful

that place is pretty cool. A little steep on the prices for my driver though. I think they should add the red line dog dish caps Also on another note. I saw on ebay a dart convertible with the above hub caps that go on a charger. They had the red center dot and the black inlay and...

i would rather have the original dart caps that look similar to the pic i posted. With the lug nut mag look. Anyone have A set of those

thank you for the link. The advertisements for the dart in 1969 all have those hub caps on them.....i think. they might be the others in the pic you showed me. I will double check. Im really looking to spend around $100. the last nice set i saw i lost out on ebay for $115. Your right, they are...

bump