Search results for query: *

Items my truck is missing. Climate control, non a/c. Driver's side: The emblem next to the RAM emblem, I think it's an actual ram. The door trim (the passenger side trim is on my driver's side, I think). The short cab trim. Passenger side: Both the RAM emblem and whatever is supposed to be...

NY. Maybe a few pieces of trim, an emblem I think, I'll check. At the moment, I need the climate part so I can put my dash back together.

This is mine, I believe it's correct but it appears to be missing the right side as there's only 1 screw holding it on the left. And it's missing the fan switch, obviously.

Non a/c with fan switch. I believe 81-93 is the same.

I bought the front/rear suspension out of a low mile 69 Barracuda and swapped it all into my 62 Valiant. The front suspension had been converted to Scarebird disc, from what I'm told too pricey/not worth it. Came with a dual master, proportioning valve, shocks, everything. I had to run new lines...

Did cop wheels come in both 15x6 and 15x7?

I hear you loud and clear. Sold my pig rusty computer controlled multiple module $200 just to diagnose garbage 2008 full size truck to get away from all the bs. Lucky for me, my 64 wagon, my daily driver now, came with a 2.76 Sure-Grip and a 318 poly 2 barrel. Fantastic on gas, great cruiser...

FYI: pre 64 open centers are not a direct swap into anything other than pre 64 open.

I used these, 2 of the first, one for the pump, one for the carb. Hose is rated for heat, ran it up over the valve cover. Info/idea came from slantsixdan Attached a terrible pic, but you can barely see the line coming off the carb, barely touches the valve cover, filter is mounted on passenger...

Kickpanel area resolved. If anyone has a solid floorpan section, specifically around the gas pedal, let me know. I can recreate, but since it has multiple steps/curves a rust free section would save some time.

Looking for driver side floorpan. Do not need a full pan, just the front section around the gas pedal and e-brake area would be enough. As well as passenger side kickpanel/corner area sheetmetal. Could use smaller pieces just to save some time, see pics. Thank you FABO.

The '62 ones mount vertically, is that the same as '63? One of mine is also corroded pretty bad, the other just a little. I was wondering about repo carpet as well, just haven't looked into that yet.

I have located a number of parts, thank you FABO. Still looking for a few. Metal: Lower fender patch panels. Rear quarter patch panels, lower. Rear wheel lip patch panels. Rear valance. Other: Front turn signal housings. Passenger side rubber splash shield, at rear of fender behind wheel...

Adding the passenger side rear fin trim, it's not stainless, appears to be chromed pot metal. And the driver's side tail light, not sure if the outer part is separate from the inner, but mine is cracked.

Yes, thank you!

:)

Got a horn ring. Laysons has full fiberglass fenders, it appears anyway, website is not the greatest. Search continues for some stuff. Thank you fabo!

Also looking for: One front plate bracket. Driver's seat adjustment knob. My sill plates are good condition, 2 door, but would consider any in better shape.

Horn ring. I'll check the part # on mine. White radio knobs. Should look the same as Lights and Wipers knobs. Signet 200 emblem, 1 or a pair. Lower fender patch panels.

I have 5: [FOR SALE] - Plymouth Mag-Style Hubcaps

If you cannot find a repro proportioning valve, and buy a distribution block, you need a separate proportioning valve. When I did mine I couldn't find a repro anywhere, so I got the distribution block and this: Adjustable Proportioning Valve

Looking for 3 packs of 4 lug nuts. If I'm correct, should fit old Cragar 15x6, 5 on 4.5 wheels. Cragar 27780-4 Cragar Wheel Lug Nuts | Summit Racing

Website isn't always up to date, but the guy has wheels. https://akhwheels.com/wheels/15-x-8-5-cragar-deep-spyder-aluminum-slot-wheel/

Espo without a doubt. On my car for years, just got another set for another car, perfect.

Norm's in NC, on ebay as well.

Fantastic. Please let me know what you find.

Just the front panel, or just enough to cover the hole, Bueller, Bueller?

Looking for just a section that matches the existing material.

NY, car is from Illinoisy though.

Wow, I'm dumb. 67 Barracuda fastback. Does it have the same weird pattern as mine?