Search results for query: *

  1. reno340

    Funny noise

    On the way to the cruise in, my car suddenly developed a noise in the tranny. Will not do it in park, will in neutral on idle. Rev, and it goes away. In gear, decelerate and it comes on. Sit in gear at light, it happens. Accelerate, and it goes away. Rebuilt transmission and new B&M torque...
  2. reno340

    Kickdown lever

    I was going to swap out my 3.8 Kickdown lever (that applies the kickdown band) with a 4.2 lever. I cannot get the 1/4 inch pipe plug that holds the lever's shaft in. I tried using a 1/4 inch ratchet. It is so stuck that I broke the ratchet. Can anyone help me on this ?? Thanks. Steve
  3. reno340

    Buzzing noise in tranny

    What the heck is the buzzing noise in my tranny? (1972 Duster 340 727 auto) It only happens in neutral and mainly when cold. I noticed it will not engage in reverse unless i put it in briefly in neutral first. I am going to do a tranny rebuild but really want to know what this is first in case I...
  4. reno340

    difference between 1962-70 and 1971 and up 727 trans

    I have been having issues with my 727 trans in my 72 Duster 340. I had fixed what I could and put on a new converter and pump shaft seal and bearing. Stopped the leak up there and then found there were more problems. Good 1-2 shift but 2-3 is weak. Car does not want to back up until warm...
  5. reno340

    67 727 trans in my 72 duster, 3 prong neutral safety switch help

    I have a 72 Duster 340 that had a 727 trans in it that has PK2801542K 2392 9273 stamped on the drivers side pan rail. (I bought it that way) It decodes as 67 727 for 318 and my 3 prong neutral safety switch does not work in it for the back up lights only. I did fix the wiring so that all checks...
  6. reno340

    Why won't my sppedo cable turn?

    I bought a brand new speedo cable for my 1972 Plymouth Duster 340 w/ 727 auto. I hooked it up and figured that If I ran the car in drive while car is up, the cable should turn, right? I did this as I wanted to make sure that it was in ok? Well, it does not turn. I pulled the pinion cover off and...
Back
Top