Search results for query: *

Title says most of it. Five years ago I started a coil over + rack and pinion front end project. Finally got the car on the road! 408, 504 hp, 904 trans. 3.55 gears.

I have a 408 with a 904 trans, and need some help on picking out a very good cooler as well as help in how to run the lines around the headers. I want a stacked plate design, and i am looking at a Derale 16 row, or 25 row cooler. They come with an6 fittings, the 25 row is rated 45,000! Btu. I...

I am looking for a hood scoop for my 65, paint on this car is almost perfect so i am looking for somthing i can color match. I have a mold for a 65 hood, so i have options to go glass rather than mess up my good hood.

What I have is a 65 Dart with no torsion bars, (went to coilovers) a rack and pinion, and a modified steering column cut back to the firewall, with multiple joints so it can be routed differently to the steering rack. So I have room around the steering shaft where stock early A's don't. Will a...

Those that have modified stock springs, please check out my thread in the suspension section, will you?

How much can they take? I made the mistake of ordering a brake kit from wilwood to use them on my 65 Dart street car, and now am faced with a rather expensive parts bill for different hubs and brackets if I want to go to the bigger ten inch spindles. Also, do the two different spindles use the...

After having done a ton of work to get those manifolds to work in a 65 Dart body, (coilovers, rack) I see it looks like there is no way the drivers side will clear a stock starter. Anybody solve this problem? If not, looks like I might have to build some headers#-o

That is the combo I want to put together. The car is a 1965 Dodge Dart. Due to the tall intake and carbs, fitment under a stock hood with a 3.5 inch air cleaner is way too high. So I figure the solution is to go to the shaker hood system and use the gen2 Hemi base plate ,air cleaner and...

This is my second shot at a rack/coilover conversion. The first I did back in 1996 on my Race car, the 65 Dart in my avitar. This is a project that can be done with a torch, chalk, yardstick, grinder and a drill press. You will need an angler grinder if you want to clean it up a bit, I am...

I have a 66 Dart trunk lid, and there was an emblem at the upper passenger side of it, which used four holes to mount it. The holes are offset up and down a touch on each end, and a "DODGE' emblem from my 65 Dart hood wouldn't fit, as the pins are slightly too narrow on the 65 emblem. What the...

I need a pair of the black plastic firewall plugs that are just above the hood spring rods. Who's got em? I bought one set, but they are too small!

Pics before the glass man came. It is far from finished the way I want, but I can drive it to shows and such. The interior pic is before a lot of the parts and seats where installed, only have a couple items to go to get the interior finished.

I am missing interior parts to go around the rear side windows of a 66 Dart two door POST ,sedan, not a hard top. Can someone shoot me some pictures so I know what the heck I am looking for? Thanks!!

I need new seats for my 66Dart project. The orginals frames are gone so I need everything. What other years and models of Mopar fit? Thanks, Greg

I saw an add on Craigslist, called the guy and went to take a look. 2006 Ram pickup had a cab fire and totaled it, guy bought it for salvage. The motor has no intake (burnt some) scorched coils and no harness, but after pulling a valve cover it looks to be OK as far as the rest goes. No sign of...

I am in need of a rear valance for my 65 Dart among other things. Anybody have a list of good bone yards ?

he title says it. I plan on a coil over front to make room for headers. Any knowledge of this swap out there?