Search results for query: *

Will an out of balance flexplate cause vibrations under load but not when revving engine in neutral?

Combo: 416 hughes eddy heads cnc flowed 297 @ .600 lunati voodoo 255/[email protected] .616 lift 110 lsa 12.4 cr E85 1 7/8 TTI headers 31/2 collector dynoed at 651/575 with super victor, now using performer rpm Thinking about grinding a cam with the same specs just changing the lsa to 114. What do...

I am changing to a dual plane from a single plane. My question is: I will have to mill the intake, since my heads have been milled. Will a machinist be able to measure how much to mill the new intake by measuring the old intake?

I am looking for a coolant temp sender that is closed when coolant is cold and opens when coolant is warm. Around 150 to 170 degrees. Does anybody know where I could get one?

Where can I get a intake manifold like the edelbrock pro flo xt made for a small block? Edelbrock EFI Chrysler Intake Manifolds PRO-FLO XT MANIFOLDS For 440 Wedge Chrysler (1500-7000 rpm) The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum...

I have a set of these heads and I am wondering what is the maximum cubic inch and hp level they will support. I also have a 4 inch crank, just looking to see about using these on a R3 block.

On my 416, I pulled the plugs today because I had a miss off idle. I saw that the front plugs were running rich and the back plugs were lean. cylinder # drivers side 1 dark brown 3 brown 5 whitish brown 7 white with specks of brown passenger side 2 black 4 brownish black 6 brown 8...

Will my eddy heads be able to flow enough to handle a 440 small block. They are cnc ported and flow about 295 and 199 w the 2.02. I would go to the 2.08 if that would help. I would like to get 650 hp out of this motor. All advice is appreciated.

I have 2 plug holes on my eddy heads that are stripped out, because like a dumb a-- I forgot to use anti seize. Can these be fixed with a helicoil or something else?

How much longer is the 400 B block than a 340?

Will a 69 318 have thick cylinder walls? I have heard that some years had this.

I have been tuning my car and I have a rich exhaust smell and I was wondering if a large duration cam will cause this. My cam is a hughes 3742al,237/242 @50. This is in a stroked 340 with eddy heads and a 650 mighty demon. I have been trying to tune out the rich smell with no success.

I would like to see some pics of the engine bay on a 72 dart swinger, v8, ac, ps, as I am having trouble remembering where everything goes after 9 months of being apart. Must be what age does to you. I would like to see left,center,and right if at all possible. Thank you.