Search results for query: *

looking for the clip for the ball and socket for the kick down linkage

looking for this if anyone has one laying around they want to get rid of. I can get one from amd but I thought I’d stop by here first.

I need this. A piece of rocker panel To fix spots under the driver and passenger side at the corner of the door. 6” per side should cover it. So a 15” long Piece to be safe. And the lower part of the quarter panel in front of the wheel well. I think even a 4 door would have this as the rust...

looking for the parking pawl return spring in the tail shaft housing Two original pan bolts One filter bolt to the valve body, one of the three longer bolts. If anyone has these laying around let me know 727 probably shares the same parts

looking for the ring gear assembly that fits a 4/4 904. 76 was the first year they had this set up. The gear is 4.5 as opposed to the later 5”. The difference in the earlier ones and this one are the teeth on this one are taller to account for the extra disc. - You can see here the...

looking for a good used one for a reasonable price that’s in perf3ct or very close to perfect shape 4 bolt with little to now wear and no dug in sealing ring marks.

I have a pretty worn engine I’m putting some life back into with new bearings and baskets. A new timing chain and oil pump. It’s a 318 and has the stock 240 cam. The cam I have is good but I’m putting a feeler out there in case someone has a cam they want to sell cheap or just get rid of...

looking to put the linkage back together . throttle bracket for a 4 barrel slider piece for the 4 barrel. throttle linkage to carb attachment. Holley 20-7 bracket for the 4160

WANTED >>>looking for the cable that goes into the shifter pipe and shifter button for an automatic console shifter new or used

anyone have a set of these for sale. They dont have to be mint e mail is [email protected] for pics

looking for one for a reasonable price that is rust free.........67 through 76 dart or valiant should work. located in tennessee

need the pieces that hold the long rectangular trim plate that sits on the trunk of a gts dart. there should be maybe 12 fateners.

anyone have a trashed power steering box laying around.....i need a good high pressure line nipple (the nipple where the high pressure line connects to the power steering box). my box was dropped when we were taking it out. the nipple got banged up and wont seal.

need the center drag link, pitman arm, and idler arm in working order for an a body. switching to the 73 up power steering box

looking for a 69 dodge dart power steering column. im looking to go cheap on this and dont need anything nice. just functional.

need one of these

box must be in working order and not leak. shipping to 38506 please quote price shipped or estimate shipping.

looking for a set of working seat tracks for bucket seats for my 69 dart

looking for 2 69 dart headliner bows and the cardboard rear headliner insulation. A headliner new if you have one of those as well. passenger side seatbelt shoulder harness. Headliner and belts need to be black or white

need the heater door that connects to the plastic heater duct box. The door will have a small latch and be black in color for the drivers side ONLY. My box is there but the door with latch is missing. please send a pic and price shipped to 38506

looking for a set of 15" wheels ](*,)PLEASE SPECIFY backspace. my dart is limited in clearance. 6.5 or 7 PICTURES please

need the under column trim for a 69 dart. not cracked or faded, black in color please send pics and quote a price shipped to 38506

looking for filler tube with absolutely no rust on the inside of the tube for a 69 dart. Tube sits at about 28 inches long and should still have the coating on the inside along with the flat piece of sheet metal in the center and has no nipplie for any evaporation system on the tube. please...

looking for a set of 4 MATCHING for a reasonable price. 15x6 maybe with a 3/4 offset. spin true with 9 inch centers for the hub caps. 5 on 4.5 lug pattern. Tennessee 38506 please give me price shipped. Thank you

looking for some of these that fit 9" centers. Just need driver quality either 2 or 4.

gas tank with no rust on the inside. looking for a reasonably priced package with the gas tank (working sending unit) gas tank pad

2 big bolt lug pattern steel wheels that will take 9 inch dog dish hub caps. prefer 14x5.5 if you have 4 of them let me know.