1.6 hughes roller rockers

[o1heavy]

just letting folks know bought a set of there rockers and after getting them shimmed and clearencing the push tube holes
these rockers are a perfect fit ,they are correctly contacting the valve stem (which is what i was trying to fix)
very happy with the product

 

[Challenger]

i have a set of the 1.6 also and they are perfect!

 

[demon seed]

Look like this maybe.

 

[o1heavy]

it is hard to believe how far the mopar performance rockers where offhttp://search.yahoo.com/r/_ylt=A0oG...ttp://dictionary.reference.com/browse/believe

 

[flyfish]

Question: how big of a spring (in diameter) can you use with those before you run into the rocker?

 

[MRL Performance]

1.500" will touch if you dont shim the rocker shaft up on an Eddy head, at least they used to. They have redesigned them, so maybe you can fit a bigger spring in there.

 

[1wild&crazyguy]

good deal.

 

[o1heavy]

the 1.5 will hit even with the shims

 

[flyfish]

1.500" will touch if you dont shim the rocker shaft up on an Eddy head, at least they used to. They have redesigned them, so maybe you can fit a bigger spring in there.

the 1.5 will hit even with the shims

Bummer, I guess I won't be going that route with my roller springs (1.54"). Thanks for the info.