[FOR SALE] 1966 Barracuda Parts Car

-
Status
Not open for further replies.
D

Dutchrebuild

FABO Gold Member
FABO Gold Member
Joined
Nov 29, 2021
Messages
366
Reaction score
238
Location
North Collins ny
Rating - 100%
6   0   0
Contact seller
Still parting out this car...
Things I know I don't have:
V8 gas pedal and engine mounts
Grills
Console
Bucket seats
Driver's fender

Things I know are there:
Rocker moulding
A very nice complete dash assembly
Wheel lip moulding, and a whole **** load of other parts for a 66...ask!
Would consider selling the whole mess as well for reasonable
Car located in 14111

IMG_20231205_135043309.jpg


IMG_20231205_135056860.jpg


IMG_20231205_135123551_HDR.jpg


IMG_20231205_135128755_HDR.jpg


IMG_20231205_135136785.jpg


IMG_20231205_135155977.jpg


IMG_20231205_135211116.jpg


IMG_20231205_135218714_HDR.jpg


IMG_20231205_135230830_HDR.jpg
 
I'm interested in the gauges sitting by the glove box and the valve covers on the L/F floor area.
If you can send me better pictures. Thanks Ed
 
I will pass on the gauges, Question on v/covers, can you find the missing fin and is the other cover bent at the center area or just angle of picture?
 
Thanks for the info, I will pass, I see it has a clutch pedal, does it have floor shifter?
 
Make sure you save the A pillar mouldings, the rear window interior plastic pieces, the rear seat hinge covers, the drivers side fresh air box, and the plastic trim pieces at the front of the big rear window. All those pieces are a good sell if not cracked or broken, and be very careful getting them out.
 
How much for the beat up 273 Commando valve covers? Also how are those 1966 Valiant tail lights that are in the parts like inside the car? Thanks
 
I am interested in the clutch pedal. Not the whole assembly with brake pedal...etc. Let me know how much. Thanks
 
I’m in Ontario north east side of the lake if you still have the complete dash assembly let me know the price thanks Jack
 
Status
Not open for further replies.
-

Back
Top