1967 440 Heads 915 Closed Chamber

[3404speed]

Located in Pa 16925
$400.00/pair as is...
Plus Shipping. can send by truck freight if it turns out cheaper from 14845.

Will fit any Big Block.

 

[68cuda78]

little steep on price hey.

 

[3404speed]

thanks for the bump...make me a reasonable offer if you are interested.

 

[RustyRatRod]

I dont know. Seen um go on FeeBay all reworked and spruced up for around a grand..... so you ain't too far off. Here's you a bump.

 

[oldkimmer]

........most i ever sold a set 4 was $200.00...with the 174 ex.......kim..........

 

[AJHemi]

I need to know what the diameter of the intake valve is. This is what determines the difference from the 67 Head and all the rest. The dia. should be 2.125, if not, you do not have a 67 HP head. Let me know, if it is 2.125 I will gladly pay your price.

AJ

Located in Pa 16925
$400.00/pair as is...
Plus Shipping. can send by truck freight if it turns out cheaper from 14845.

Will fit any Big Block.

 

[moper]

Intakes were always 2.08 on all 915s. The difference was the exh valve. That was either 1.74 if they were supposed to be on a 440HP, or 1.65(IIRC) if they were supposed to be on non-HP 440s. I say "supposed to" because until you pull them off and look, you never know for sure what you have. Those look like the smaller exh valve.

 

[X-RACER]

That's a pretty old add guys. I dunno.

 

[partmopar]

Intakes were always 2.08 on all 915s. The difference was the exh valve. That was either 1.74 if they were supposed to be on a 440HP, or 1.65(IIRC) if they were supposed to be on non-HP 440s. I say "supposed to" because until you pull them off and look, you never know for sure what you have. Those look like the smaller exh valve.

Yes, I think you are correct!

 

[davescuda]

Intakes were always 2.08 on all 915s. The difference was the exh valve. That was either 1.74 if they were supposed to be on a 440HP, or 1.65(IIRC) if they were supposed to be on non-HP 440s. I say "supposed to" because until you pull them off and look, you never know for sure what you have. Those look like the smaller exh valve.

yes this is correct

if these are sold I have a set of 440 HP ones for sale