[FOR SALE] 1967 A&B body Plymouth 14” Mag Style Wheelcovers

[cosgig]

Howdy people, cosgig here. Up for sale in this listing is a set of 4 mag style full wheel-covers that I believe are correct for 1967 A&B body cars With 14” rims. Here’s the details...

they are all in very nice shape, they have the Plymouth emblem in the center, all shine well. There is one “crimp” on the edge of one near the valve stem hole, a small dent on another near the outer lip, and a small ding or 2 here and there. No curb rash on any of the outer lips. They’re pretty nice, certainly for daily drivers and fun field cars, but not necessarily for the concours set.

The price is $100 plus shipping from my zip code 48169, or they can be picked up at or near my home near Ann Arbor, Mi. As usual, message with any questions, and enjoy your spring startups! Geof

 

[65 Dartman]

I see these take the long 2 inch chrome lug nuts the same as the 65/66 Formula S hubcaps. Happen to have them?

 

[cosgig]

I see these take the long 2 inch chrome lug nuts the same as the 65/66 Formula S hubcaps. Happen to have them?

Well Don, here’s what I found out. If you’re using the 5.5” rims, then yes, you need the longest lugs. However, if you’re putting them on 4.5” rims, you can use shorter chrome lugnuts.

So, do I have the lugnuts? I have some of the longer ones, a bunch of shorter ones, some LH and some RH. I can round up as many of the desired nuts as possible, but that’s basically the reason I didn’t list them with any lugnuts. These were on a set of 4.5” rims and I was using the shorter lugnuts, but they were on a 66 and just didn’t look right! That’s my story and I’m sticking to it!

 

[65 Dartman]

Thanks for all the info!